Bedienungsanleitung JVC GR-DVX507 (Seite 75 von 104) (Englisch)

39784

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

EN 75

Master Page: Right

GR-DVX707EG_37-79.fm Page 75

Select Scenes

6 Point the remote control at the camcorder’s

remote sensor. Press PLAY (U) and then press

R.A.EDIT ON/OFF on the remote control.

The Random Assemble Editing Menu appears.

7 If using a Wipe/Fader at the beginning of the

scene, press FADE/WIPE on the remote control.

● Cycle through the effects by pressing

repeatedly, and stop when the one you want is

displayed.

8 At the beginning of the scene, press EDIT IN/

OUT on the remote control. The Edit-In position

appears in the Random Assemble Editing Menu.

9 At the end of the scene, press EDIT IN/OUT. The

Edit-Out position appears in the Random

Assemble Editing Menu.

10 If using a Wipe/Fader at the end of the scene,

press FADE/WIPE.

● Cycle through the effects by pressing

repeatedly, and stop when the one you want is

displayed.

● If you select a Wipe/Fader effect for an Edit-Out

point, the effect is automatically applied to the

following Edit-In point.

● When you use Wipe/Fader effects, that time is

included in the total time.

11 If using Playback Special Effects, press EFFECT.

(墌 pg. 69)

12 Repeat steps 8 through 11 to register

additional scenes.

● To change previously registered points, press

CANCEL on the remote control. The registered

points disappear, one at a time, from the most

recently registered point.

● If you are not using Wipe/Fader or Program AE

with special effects, repeat steps 8 and 9 only.

NOTES:

● When choosing a scene, set Edit-In and Edit-Out

points so that there is a relatively large difference

between them.

● If the search time for an in-point exceeds

5 minutes, the recording deck’s Record-Standby

mode will be cancelled and editing will not take

place.

● If there are blank portions before or after the Edit-

In and Edit-Out points, a blue screen may be

included in the edited version.

● Since time codes register time only as accurately

as seconds, the time code total time may not

match the total program time exactly.

● Turning off the camcorder’s power erases all

registered Edit-In and Edit-Out points.

● If you select Sepia or Monotone mode from

Program AE with special effects, you cannot use

the Black & White Fader. In this case the Black &

White indicator begins blinking. Once the next

Edit-In point is registered, the effect is turned off.

To combine these effects, use Sepia or Monotone

during recording, then use the Black & White

Fader during Random Assemble Editing.

● It is not possible to use Wipe/Fader effects and

Program AE with special effects during Random

Assemble Editing using a DV cable.

PLAY

CANCEL

R.A.EDIT

ON/OFF

FADE/WIPE

EFFECT

EDIT IN/OUT

Remote sensor

Random Assemble

Editing Menu

Selected parameter

–– :–– ~

–

––

000

––

TOTAL

CODETIME

NIOUT

MODE

CONTINUED ON NEXT PAGE

GR-DVX707EG_37-79.fm Page 75 Thursday, January 31, 2002 12:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVX507 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVX507

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info