Bedienungsanleitung JVC GR-DVX77 (Seite 40 von 100) (Englisch)

39792

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

40 EN

WIND

CUT

Menu Screen Explanations (cont.)

WIDE

MODE

Records with no change in the screen ratio. For playback on a TV with a

normal screen ratio.

Inserts black bands at the top and bottom of the screen. During playback on

wide-screen TVs, the black bands at the top and bottom of the screen are

cut and the screen ratio becomes 16:9. appears. When using this

mode, refer to your wide-screen TV’s instruction manual. During playback/

recording on 4:3 TVs/LCD monitor/viewfinder, black bands are inserted at

the top and bottom of the screen and the image appears like a letterboxed

16:9 movie.

•“CINEMA” mode is effective only when the VIDEO/DSC Switch is set to

“VIDEO” (GR-DVX88/DVX77 only).

For playback on TVs with an aspect ratio of 16:9. Naturally expands the

image to fit the screen without distortion. appears. When using this

mode, refer to your wide-screen TV’s instruction manual. During playback/

recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated

vertically.

•“SQUEEZE” mode is effective only when the VIDEO/DSC Switch is set to

“VIDEO” (GR-DVX88/DVX77 only).

Disengages the function which cuts down on noise created by wind.

Helps cut down on noise created by wind. “ ” appears. The quality of

the sound will change. This is normal.

Refer to “Snapshot Flash” ( pg. 54).

Refer to “Flash Brightness Adjustment” ( pg. 55).

Even though not heard while shooting, shutter sound is recorded on the

tape.

The beep sounds when the power is turned on or off, and at the beginning

and end of recording. Also to activate the shutter sound effect ( pg. 26,

50).

Instead of a beep, a melody sounds when any operation is performed. It

also activates the shutter sound effect ( pg. 26, 50).

The tally lamp remains off at all times.

The tally lamp comes on to signal the start of recording.

This number is necessary when connecting the camcorder to a device such as a

computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is

06.

Automatic demonstration will not take place.

Demonstrates certain functions such as Program AE with special effects,

etc., and can be used to confirm how these functions operate. When

“DEMO MODE” is set to “ON” and the Menu Screen is closed,

demonstration starts. Performing any operation during the demonstration

stops the demonstration temporarily. If no operation is performed for more

than 1 minute after that, the demonstration will resume.

NOTES:

● If a tape is in the camcorder, the demonstration cannot be turned on.

● “DEMO MODE” remains “ON” even if the camcorder power is turned

off.

● If “DEMO MODE” remains “ON”, some functions will not be available.

After viewing demo, set to “OFF”.

OFF

CINEMA

SQUEEZE

OFF

MANUAL

OFF

BEEP

MELODY

BEEP

DEMO

MODE

NUMBER

(GR-DVX44

only)

OFF

TALLY

OFF

SYSTEM

USING MENUS FOR DETAILED ADJUSTMENT

(cont.)

FLASH (GR-DVX88/

DVX77 only)

FLASH ADJ.

(GR-DVX88/DVX77 only)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVX77 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVX77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info