Bedienungsanleitung JVC GR-DVX77 (Seite 58 von 100) (Englisch)

39792

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

58 EN

DV cable

(optional)

Video unit

equipped with DV

connector

To DV IN/OUT

To DV

Core filter

Dubbing To Or From A Video Unit Equipped

With A DV Connector (Digital Dubbing)

It is also possible to copy recorded scenes from the

camcorder onto another video unit equipped with a DV

connector. Since a digital signal is sent, there is little if

any image or sound deterioration.

[To use this camcorder as a player]

Make sure all units are turned off. Connect the

camcorder to a video unit equipped with a DV input

connector using a DV cable as shown in the

illustration.

Set the VIDEO/DSC Switch to “VIDEO” (GR-

DVX88/DVX77 only), set the camcorder’s Power

Switch to “ ” while pressing down the Lock

Button located on the switch, turn on the video

unit’s power, and insert the appropriate cassettes in

the camcorder and the video unit.

Press 4/6 to play back the source tape.

While watching the playback on the monitor,

engage the DV connector-equipped video unit’s

record mode from the spot on the source tape you

want to begin recording.

For GR-DVX88 Owners:

To Use This Camcorder As A Recorder . . .

1. Set the VIDEO/DSC Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the

Lock Button located on the switch.

2. Set “REC MODE” to “SP” or “LP” in the Menu Screen (墌 pg. 42).

3. Connect the DV cable as shown in the illustration and load a cassette to record on.

4. Press the Recording Start/Stop button to engage the Record-Pause mode. “

DV. IN

” appears on the

screen.

5. Press the Recording Start/Stop button to start recording. rotates.

6. Press the Recording Start/Stop button again to engage the Record-Pause mode. stops rotating.

NOTES:

●

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the

current “SOUND MODE” setting (

墌

pg. 39).

●

During Digital Dubbing, no signals are output from the AV output connector.

DUBBING

(cont.)

NOTES:

●

It is recommended to use the AC Adapter as the power supply instead of the battery pack (

墌

pg. 9).

●

If the remote control is used when both the player and recorder are JVC video units, both units will

perform the same operation. To prevent this from happening, press the buttons on both units.

●

If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop

so that an unusual image is not dubbed.

●

Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this

occurs, turn off the power and make connections again.

●

If “Playback Zoom” (

墌

pg. 64), “Playback Special Effects” (

墌

pg. 65) or “Snapshot” is attempted during

playback, only the original playback image recorded on the tape is output from the DV connector.

●

When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

Connector

cover*

* When connecting the cables, open this cover.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVX77 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVX77

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info