Bedienungsanleitung JVC GR-DX100 (Seite 46 von 60) (Englisch)

39848

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

TROUBLESHOOTING

The Black & White Fader does not work.

• The Sepia or Monotone mode is activated.

¥ Turn off Sepia and Monotone (੬ pg. 27).

During R.A.Edit, the Dissolve function does

not work.

• The Sepia or Monotone mode of Programme AE with

special effects is activated.

¥ Turn off Sepia or Monotone before adding Dissolve

to a scene transition (੬ pg. 27, 43).

• The previously selected mode of Programme AE with

special effects was changed after the last selected

scene for editing was registered.

¥ Make sure you have selected the mode of Pro-

gramme AE with special effects you want before

starting editing (੬ pg. 27, 43).

During R.A.Edit, the Picture Wipe and

Dissolve functions do not work.

• The last selected editing scene is ending.

¥ Select Picture Wipe or Dissolve before beginning

editing. The effects are then automatically activated

(੬ pg. 42, 43).

• At the end of the last selected scene for editing, the

Power Switch @ was set to “OFF”.

¥ Do not turn off the camcorder’s power after setting

Edit-In and Edit-Out points, as they will all be erased

(੬ pg. 42).

• The power is off.

¥ The camcorder automatically shuts off after 5

minutes have elapsed in the Pause mode. Make

sure you continue operations within 5 minutes after

engaging Pause mode (੬ pg. 42, 43).

Scene transition does not go as expected.

• When using “Picture Wipe/Dissolve” (੬ pg. 43),

there is a delay of a fraction of a second between the

previous record stop-point and the Dissolve start-

point. This is normal, but this slight delay becomes

especially noticeable when shooting fast-moving

subject or during rapid panning.

The image looks like the shutter speed is too

slow.

• When shooting in the dark, the unit becomes highly

sensitive to light when “GAIN UP” is set to “AUTO” in

the Menu Screen.

¥ If you want the lighting to look more natural, set

“GAIN UP” to “AGC” or “OFF” in the Menu Screen

(੬ pg. 33).

White Balance cannot be activated.

• The Sepia or Monotone mode is activated.

¥ Turn off Sepia or Monotone before setting White

Balance (੬ pg. 27, 31).

When shooting a subject illuminated by bright

light, vertical lines appear.

• This is a result of exceedingly high contrast, and is

not a malfunction.

When the screen is under direct sunlight

during shooting, the screen becomes red or

black for an instant.

• This is not a malfunction.

The date/time does not appear.

•“DATE/TIME” is set to “OFF” in the Menu Screen.

¥ Set “DATE/TIME” to “ON” in the Menu Screen

(੬ pg. 34, 36).

Files stored on the memory card cannot be

deleted.

• Files stored on the memory card are protected.

¥ Remove protection from the files stored on the

memory card and delete them (੬ pg. 20).

Time code does not appear.

•“TIME CODE” is set to “OFF” in the Menu Screen.

¥ Set “TIME CODE” to “ON” in the Menu Screen

(੬ pg. 35, 36).

Images on the LCD monitor appear dark or

whitish.

• In places subject to low temperature, images become

dark due to the characteristics of the LCD monitor.

When this happens, the displayed colours differ from

those that are actually recorded. This is not a defect

of the camcorder.

• When the LCD monitor's fluorescent light reaches the

end of its service life, images on the LCD monitor

become dark. Consult your nearest JVC dealer.

¥ Adjust the brightness and angle of the LCD monitor

(੬ pg. 12).

The rear of the LCD monitor is hot.

• The light used to illuminate the LCD monitor causes it

to become hot.

¥ Close the LCD monitor to turn it off or set the Power

Switch @ to “OFF”, and let the unit cool down.

The indicators and the image colour on the

LCD monitor are not clear.

• This may occur when the surface or the edge of the

LCD monitor is pressed.

The LCD monitor or viewfinder indications

blink.

• Certain Fade/Wipe effects, certain modes of

Programme AE with special effects, “DIS” and other

functions that cannot be used together are selected at

the same time.

¥ Re-read the sections covering Fade/Wipe effects,

Programme AE with special effects and “DIS”

(੬ pg. 27, 28, 33).

01 DX300/100/95/75EK_EN 45-60 2/26/03, 7:13 PM46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX100 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info