39844
29
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
MENUS FOR DETAILED ADJUSTMENT
EN 29
MasterPage: Advan_Right
ADVANCED FEATURES
[OFF]: Records with no change in the screen ratio. For
playback on a TV with a normal screen ratio.
CINEMA* : Inserts black bands at the top and bottom
of the screen. The indicator appears. During playback
on wide-screen TVs, the black bands at the top and
bottom of the screen are cut and the screen ratio
becomes 16:9. When using this mode, refer to your wide-
screen TVs instruction manual. During playback/
recording on 4:3 TVs/LCD monitor/viewfinder, black
bands are inserted at the top and bottom of the screen
and the image appears like a letter boxed 16:9 movie.
SQUEEZE* : For playback on TVs with an aspect ratio
of 16:9. Naturally expands the image to fit the screen
without distortion. The indicator appears. When using
this mode, refer to your wide-screen TVs instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, the image is elongated vertically.
* Available only when the VIDEO/MEMORY Switch is set to
VIDEO. (GR-DX97/77/67 only)
[OFF]: Disengages the function.
ON : Helps cut down on noise created by wind. The
“” indicator appears. The quality of the sound will
change. This is normal.
SYSTEM
The s SYSTEM functions which are set when the
Power Switch is set to M are also applied when the
Power Switch is set to PLAY.
[ ] = Factory-preset
OFF: Even though not heard while shooting, shutter
sound is recorded on the tape.
BEEP: The beep sounds when the power is turned on or
off, and at the beginning and end of recording. It also
activates the shutter sound effect. ( pg. 21, 32)
[MELODY]: Instead of a beep, a melody sounds when
any operation is performed. It also activates the shutter
sound effect. ( pg. 21, 32)
OFF: The tally lamp remains off at all times.
[ON]: The tally lamp comes on to signal the start of
recording.
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Program
AE with special effects, etc., and can be used to confirm
how these functions operate. Demonstration starts in the
following cases:
When the Menu Screen is closed after DEMO MODE is
turned ON.
With DEMO MODE set to ON, if there is no operation for
about 3 minutes after the Power Switch is set to A or M.
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is performed
for more than 3 minutes after that, the demonstration will
resume.
NOTES:
If a cassette is in the camcorder, the demonstration cannot
be turned on.
DEMO MODE remains ON even if the camcorder power
is turned off.
If DEMO MODE remains ON, some functions will not be
available. After viewing demo, set to OFF.
[LCD]: The image is displayed on the LCD monitor when
the viewfinder is pulled out while the LCD monitor is
opened.
FINDER: The image is displayed in the viewfinder when
the viewfinder is pulled out while the LCD monitor is
opened.
EXECUTE: Resets all settings to the factory-preset.
[RETURN]: Does not reset all settings to the factory-
preset.
CAMERA DISPLAY
The n (CAMERA DISPLAY) settings are effective even
when the Power Switch is set to A. However, the menu
settings can be changed only when the Power Switch is set
to M.
The n (CAMERA DISPLAY) settings except BRIGHT
and AUX MIC are effective only for shooting.
[ ] = Factory-preset
pg. 13, Brightness Adjustment Of The Display
LCD: Keeps the camcorders display (except the date,
time and time code) from appearing on the connected TV
screen.
[LCD/TV]: Makes the camcorders display appear on
screen when the camcorder is connected to a TV.
OFF: The date/time does not appear.
[AUTO]: Displays the date/time for approx. 5 seconds
when the Power Switch is set from OFF to A or M.
ON: The date/time is always displayed.
The date indication can also be turned on/off by pressing
the DISPLAY Button on the remote control (provided).
( pg. 19, 37, 42)
WIDE MODE
WIND CUT
BEEP
TALLY
REMOTE
DEMO MODE
PRIORITY
CAM RESET
BRIGHT
ON SCREEN
DATE/TIME
GR-DX97PAL.book Page 29 Tuesday, January 6, 2004 12:44 PM
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC GR-DX27 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC GR-DX27

JVC GR-DX27 Bedienungsanleitung - Deutsch - 52 seiten

JVC GR-DX27 Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info