Bedienungsanleitung JVC GR-DX28 (Seite 41 von 52) (Englisch)

39842

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

EDITING

EN 41

MasterPage: Advan_Right

ADVANCED FEATURES

Create edited videos easily using your camcorder as the

source player. You can select up to 8 “cuts” for automatic

editing, in any order you like. R.A.Edit is more easily

performed when the MBR (Multi-Brand Remote) is set to

operate with your brand of VCR (see “VCR CODE

LIST”), but can also be performed by operating the VCR

manually.

● Use the optional remote control kit RM-V717KITU. It is a

set composed of RM-V717U remote control, an Editing

cable* and an Editing extension cable.

* The Editing cable is not required with this camcorder.

● Refer to remote control kit’s instructions as well.

Set Remote/VCR Code

1 Turn off the power to the

VCR and point the remote

towards the VCR’s infrared

sensor. Then, referring to the

VCR CODE LIST, press and

hold MBR SET, and enter the

brand code.

The code is automatically set

once you release MBR SET,

and the VCR’s power comes

on.

2 Make sure the VCR’s power

is on. Then, while holding

SHIFT, press the button on the

remote for the desired function.

The functions the remote can

control are PLAY (U), STOP (8), PAU SE (9), FF (5),

REW (3) and VCR REC STBY (79; you do not need

to press SHIFT for this one).

You are now ready to try Random Assemble Editing.

IMPORTANT:

Although the MBR is compatible with JVC VCRs and those of

many other makers, it may not work with yours or may offer

limited functions.

NOTES:

● If the VCR’s power does not come on in step 1, try another

code from the VCR CODE LIST.

● Some brands of VCR do not come on automatically. In this

case, turn the power on manually and try step 2.

● If the remote control is not able to control the VCR, use the

controls on the VCR.

● When the remote control’s batteries run out, the VCR brand

you have set will be erased. In that case, replace the old

battery with a new one to reset the VCR brand.

VCR CODE LIST

Buttons And Functions (RM-V717U)

A Infrared beam transmitting window

Transmits the beam signal.

B DISPLAY Button*

C SHIFT Button (see the left column)

D SLOW Rewind/Forward Buttons*

Left/Right Buttons*

E REW Button*

F FADE/WIPE Button (੬ pg. 43)

G EFFECT ON/OFF Button*

H EFFECT Button*

I PAUSE IN Connector (੬ pg. 42)

J MBR SET Button (see the left column)

K Up Button*

INSERT Button*

L Down Button*

A. DUB Button*

M PLAY Button*

N FF Button*

O STOP Button*

P PAUSE Button*

Q R.A.EDIT Buttons

(੬ pg. 43, 44)

a Zoom (T/W) Buttons*

b START/STOP Button*

c SNAPSHOT Button*

* Functions the same as each corresponding button on the

provided remote control RM-V720U (੬ pg. 19)

Random Assemble Editing [R.A.Edit]

MBR SETSHIFT

RM-V717U (optional)

BRAND NAME CODE

AKAI 62, 64, 77

BLAUPUNKT 13

DAEWOO 18

FERGUSON 97, 98, 32

GRUNDIG 14, 34

HITACHI 66, 63

JVC A

JVC B

JVC C

LG/GOLDSTAR 11

MITSUBISHI 67, 68

NEC 37, 38

PANASONIC 13, 17, 11, 94, 18

PHILIPS 19, 95, 11, 94, 91, 96, 12, 33, 72

SAMSUNG 94

SANYO 36, 35

SELECO, REX 91, 96

SHARP 15, 10

SONY 65, 60, 39, 31

THOMSON,

TELEFUNKEN, SABA,

NORDMENDE

91, 96, 97, 32

TOSHIBA 69, 61

GR-DX97PAL.book Page 41 Tuesday, January 6, 2004 12:44 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX28 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX28

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info