Bedienungsanleitung JVC GR-DX28 (Seite 44 von 52) (Englisch)

39842

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

EDITING

44 EN

MasterPage: Left

Automatic Editing To VCR

13 Rewind the tape in the camcorder to the beginning

of the scene you want to edit and press PAUSE (9).

14 Press VCR REC STBY (79), or manually engage

the VCR’s Record-Pause mode.

15 Press the Recording Start/Stop Button on the

camcorder. Editing proceeds as programmed, right

through to the end of the last registered scene.

● When dubbing is complete, the camcorder enters the

Pause mode, and the VCR enters its Record-Pause mode.

● If you do not register an Edit-Out point, the tape will be

dubbed all the way to the end automatically.

● If you operate the camcorder during automatic editing, the

VCR will enter its Record-Pause mode and automatic

editing will stop.

16 Engage the Stop modes for the camcorder and the

VCR.

● To make the R.A.Edit counter display disappear, press

R.A.EDIT ON/OFF on the remote control.

NOTES:

● Pressing R.A.EDIT ON/OFF on the remote control clears

all settings registered during Random Assemble Editing.

● When the editing extension cable is connected to the

remote control’s PAUSE IN connector during dubbing,

make sure the remote control is pointed at the VCR’s

sensor, and the path between the two is unobstructed.

● Random Assemble Editing may not function properly when

using a tape including several duplicated time codes.

(੬ pg. 17)

For More Accurate Editing

Some VCRs make the transition from Record-Pause to

Record mode faster than others. Even if you begin

editing for the camcorder and the VCR at exactly the

same time, you may lose scenes you wanted, or find that

you have recorded scenes you did not want. For a cleanly

edited tape, confirm and adjust the timing of the

camcorder against your VCR.

Diagnosing VCR/Camcorder Timing

1 Play back the tape in the camcorder, then point the

remote control at the camcorder’s remote sensor and

press R.A.EDIT ON/OFF.

● Random Assemble Editing Menu

appears.

2 Perform Random Assemble

Editing on Program 1 only. In order

to check VCR and camcorder

timing, select the beginning of a

scene transition as your Edit-In

point.

3 Play back the dubbed scene.

● If any images from the scene prior to the transition you

chose for your Edit-In point were recorded, that means your

VCR moves too quickly from Record-Pause to Record

mode.

● If the scene you tried to dub starts in progress, the VCR is

slow to start recording.

Adjustment Of VCR/Camcorder Timing

4 Press R.A.EDIT ON/OFF to make the Random

Assemble Editing menu disappear, then press MENU.

The Menu Screen appears.

5 Press or to select “t”, and press SET. The

VIDEO Menu appears.

6 Press or to select “SYNCHRO”, and press SET.

The value for “SYNCHRO” is highlighted. (Factory-

preset: ±0.0)

7 Based on the diagnostics performed, you can now

advance the VCR’s record timing by pressing . You

can also delay the VCR’s record timing by pressing .

● The adjustment range is from –1.3 to +1.3 seconds, in 0.1-

second increments.

Press SET to finish the setting.

8 Press or to select “BRETURN”, and press SET

twice.

● Now perform Random Assemble Editing beginning with

step 6 on page 43.

NOTES:

● Before performing actual Random Assemble Editing, do a

few Random Assemble Editing trial runs to check whether

the value you have input is appropriate or not, and make

adjustments accordingly.

● Depending on the recorder, there may be situations where

the timing difference cannot be fully corrected.

––: –– ~

––

NIOUT

MOD E

–

––

000

TOTAL

CODETIME

Program 1

GR-DX97PAL.book Page 44 Tuesday, January 6, 2004 12:44 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX28 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX28

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info