Bedienungsanleitung JVC GR-DX317 (Seite 43 von 52) (Englisch)

39816

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

EDITING

EN 43

MasterPage: Advan_Right

ADVANCED FEATURES

Select Scenes

6 Press PLAY (U) and then press R.A.EDIT ON/OFF on

the remote control.

● The Random Assemble Editing

Menu appears.

7 If using a Wipe/Fader at the

beginning of the scene, press

FADE/WIPE on the remote

control.

● Cycle through the effects by

pressing repeatedly, and stop

when the one you want is

displayed.

● You cannot use a Picture Wipe/Dissolve at the beginning of

Program 1.

8 At the beginning of the scene, press EDIT IN/OUT on

the remote control. The Edit-In position appears in the

Random Assemble Editing Menu.

9 At the end of the scene, press EDIT IN/OUT. The Edit-

Out position appears in the Random Assemble Editing

Menu.

10 If using a Wipe/Fader at the end of the scene, press

FADE/WIPE.

● Cycle through the effects by pressing repeatedly, and stop

when the one you want is displayed.

● If you select a Wipe/Fader effect for an Edit-Out point, the

effect is automatically applied to the following Edit-In point.

● You cannot use a Picture Wipe/Dissolve at the end of the

last scene.

● When you use Fader/Wipe effects, that time is included in

the total time (this does not apply to Picture Wipe/Dissolve).

11 If using Playback Special Effects, press EFFECT.

(墌 pg. 20)

12 Repeat steps 8 through 11 to register additional

scenes.

● To change previously registered points, press CANCEL on

the remote control. The registered points disappear, one at

a time, from the most recently registered point.

● If you are not using Wipe/Fader or Program AE with special

effects, repeat steps 8 and 9 only.

NOTES:

● When choosing a scene, set Edit-In and Edit-Out points so

that there is a relatively large difference between them.

● If the search time for an in-point exceeds 5 minutes, the

recording deck’s Record-Standby mode will be cancelled

and editing will not take place.

● If there are blank portions before or after the Edit-In and

Edit-Out points, a blue screen may be included in the edited

version.

● Turning off the camcorder’s power erases all registered

Edit-In and Edit-Out points.

● If you select Sepia or Monotone mode from Program AE

with special effects, you cannot use the Dissolve or Black &

White Fader. In this case the Dissolve or Black & White

indicator begins blinking. Once the next Edit-In point is

registered, the effect is turned off. To combine these

effects, use Sepia or Monotone during recording, then use

the Dissolve or Black & White Fader during Random

Assemble Editing.

● It is not possible to use Wipe/Fader effects and Program AE

with special effects during Random Assemble Editing using

a DV cable.

Picture Wipe And Dissolve Menu (available only for

Random Assemble Editing)

You can use not only the wipe/fader effects on page 34

but also the picture wipe and dissolve effects below.

DISSOLVE: The new scene gradually appears as

the old one gradually disappears.

WIPE–CORNER: The new scene wipes in over the

previous one from the upper right corner to the lower left

corner.

WIPE–WINDOW: The next scene gradually wipes

in from the centre of the screen toward the corners,

covering the previous scene.

WIPE–SLIDE: The next scene gradually wipes in

over the previous one from right to left.

WIPE–DOOR: The previous scene wipes out from

the centre to the right and left, like a door being pushed

open to reveal the next scene.

WIPE–SCROLL: The new scene wipes in over the

last one from the bottom of the screen to the top.

WIPE–SHUTTER: The new scene wipes in over

the previous one from the centre toward the top and

bottom of the screen.

PLAY

CANCEL

R.A.EDIT

ON/OFF

FADE/WIPE

EFFECT

EDIT IN/OUT

VCR REC STBY

PAUSE

RM-V717U (optional)

––: –– ~

–

––

000

––

TOTAL

CODETIME

NIOUT

MODE

Selected parameter

GR-DX317PAL.book Page 43 Friday, March 5, 2004 12:52 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX317 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX317

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info