Bedienungsanleitung JVC GR-DX35 (Seite 10 von 48) (Englisch)

39826

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

● It takes a few seconds for the cassette holder to open. Do

not apply force.

● There may be a delay after you open the cassette holder

cover until the cassette holder opens. Do not use force.

● If you wait a few seconds and the cassette holder does

not open, close the cassette holder cover and try again. If

the cassette holder still does not open, turn the

camcorder off then on again.

● If the tape does not load properly, open the cassette

holder cover fully and remove the cassette. A few minutes

later, insert it again.

● When the camcorder is suddenly moved from a cold

place to a warm environment, wait a short time before

opening the cassette holder cover.

● Once the cassette holder is closed, it recedes automati-

cally. Wait until it recedes completely before closing the

cassette holder cover.

● Closing the cassette holder cover before the cassette

holder comes out may cause damage to the camcorder.

● Even when the camcorder is switched off, a cassette can

be loaded or unloaded. After the cassette holder is closed

with the camcorder switched off, however, it may not

recede. It is recommended to turn the power on before

loading or unloading.

● When resuming recording, once you open the cassette

holder cover a blank portion will be recorded on the tape

or a previously recorded scene will be erased (recorded

over) regardless of whether the cassette holder came out

or not. See page 13 for information about recording from

the middle of a tape.

Date/Time Settings

The date/time is recorded onto the tape at all times, but

its display can be turned on or off during playback

(੬ pg. 23).

1 Set the Power Switch 8 to “ ” while pressing

down the Lock Button 0 located on the switch, and

open the LCD monitor fully or pull out the viewfinder

fully. The Power lamp 6 lights and the camcorder is

turned on.

2 Press MENU 2 to access the Menu Screen.

3 Press + or – 3 to select “ (CAMERA DISPLAY)”

and press SELECT/SET 1.

4 Press + or – 3 to select “CLOCK ADJ.”. Press

SELECT/SET 1 and “day” is highlighted. Press + or –

3 to input the day. Press SELECT/SET 1. Repeat to

input the month, year, hour and minute.

Press + or – 3 to select “ RETURN”, and press

SELECT/SET 1 twice. The Menu Screen closes.

NOTES:

● Even if you select “CLOCK ADJ.”, if the parameter is not

highlighted the camcorder’s internal clock continues to

operate. Once you move the highlight bar to the first date/

time parameter (day), the clock stops. When you finish

setting the minute and press SELECT/SET

1, the date

and time begin operation from the date and time you just

set.

●

੬ pg. 38, “Built-in Clock’s Rechargeable Lithium Battery”.

GETTING STARTED

Recording Mode Setting

Set the tape recording mode depending on your

preference.

1 Set the Power Switch 8 to “ ” while pressing

down the Lock Button 0 located on the switch, and

open the LCD monitor fully or pull out the viewfinder

fully. The Power lamp 6 lights and the camcorder is

turned on.

2 Press MENU 2. The Menu Screen appears.

3 Press + or – 3 to select “ (CAMERA)” and press

SELECT/SET 1.

4 Press + or – 3 to select “REC MODE” and press

SELECT/SET 1. The Sub Menu appears. Select “SP”

or “LP” by pressing + or – 3 and press SELECT/SET

1. Press + or – 3 to select “ RETURN”, and press

SELECT/SET 1 twice. The Menu Screen closes.

• Audio Dubbing and Insert Editing (੬ pg. 29) are

possible on tapes recorded in the SP mode.

•“LP” (Long Play) is more economical, providing

1.5 times the recording time.

NOTES:

● If the recording mode is switched during recording, the

playback picture will be blurred at the switching point.

● It is recommended that tapes recorded in the LP mode on

this camcorder be played back on this camcorder.

● During playback of a tape recorded on another

camcorder, blocks of noise may appear or there may be

momentary pauses in the sound.

RETURN

–

AREMACD

ISPLAY

RE NEON SC

LCD / TV

UAOT

IMETDATE /

T I ME CODE

CLOCK

ADJ .

FFO

2.025 . 1

30:7

AREMACD

ISPLAY

CLOCK

ADJ .

2.025 .1

30:7

02 3

01 DX55/45/35/25EK_EN 01-10 03.1.23, 1:45 PM10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX35 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info