Bedienungsanleitung JVC GR-DX57 (Seite 37 von 52) (Englisch)

39836

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ADVANCED FEATURES

EN 37

MasterPage: Advan_Heading0_Right

EDITING

A Not connected

B To S-VIDEO IN or OUT**

C Yellow to VIDEO IN or OUT

D Red to AUDIO R IN or OUT

E White to AUDIO L IN or OUT

* If your VCR has a SCART connector, use the provided

cable adapter. (The provided cable adapter accepts only

output signals from this camcorder. To use this camcorder

as a recorder, use a commercially available cable

adapter.)

** Connect when your TV/VCR has an S-VIDEO IN/OUT

connector. In this case, it is not necessary to connect the

yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as

required:

Y/C: When connecting to a TV or VCR which accepts Y/

C signals and uses an S-Video cable.

CVBS: When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video cable.

To use this camcorder as a player

1 Following the illustrations, connect the camcorder and

the VCR.

2 Start playback on the camcorder. (੬ pg. 17)

3 At the point you want to start dubbing, start recording

on the VCR. (Refer to the VCR’s instruction manual.)

4 To stop dubbing, stop recording on the VCR, then stop

playback on the camcorder.

NOTES:

● It is recommended to use the AC Adapter as the power

supply instead of the battery pack. (੬ pg. 11)

● To choose whether or not the following displays appear on

the connected TV

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

(੬ pg. 27, 31) Or, press DISPLAY on the remote control

to turn on/off the date indication.

• Time code

Set “TIME CODE” to “OFF” or “ON”. (੬ pg. 27, 31)

• Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.

(੬ pg. 27, 31)

To use this camcorder as a recorder (GR-DX97/77/57/

37 only)

1 Following the illustrations, connect the camcorder and

the VCR.

2 Set “REC MODE” to “SP” or “LP”. (੬ pg. 27, 28)

3 Set the camcorder’s Power Switch to “PLAY”.

4 Set “S/AV INPUT” to “A/V.IN” or “S.IN”*.

(੬ pg. 27, 30)

* Select “S.IN” when using S-VIDEO OUT connector on your

TV/VCR.

5 Press the Recording Start/Stop Button to engage the

Record-Pause mode.

● The “” or “” indication appears on the

screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the

Recording Start/Stop Button to start dubbing. The

indication rotates.

8 Press the Recording Start/Stop Button again to stop

dubbing. The indication stops rotating.

NOTES:

● After dubbing, set “S/AV INPUT” back to “OFF”.

● Analogue signals can be converted to digital signals with

this procedure.

● It is also possible to dub from another camcorder.

Dubbing To Or From A VCR

123 4 5

VCR

Open the cover.

To AV connector

To TV or VCR

“Y/C”/“CVBS”

Video Out Select

Switch

Cable Adapter*

S/AV/Editing cable

(provided)

mark

A/V

IN S

GR-DX97PAL.book Page 37 Tuesday, January 6, 2004 12:44 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX57 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX57

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info