Bedienungsanleitung JVC GR-DX95 (Seite 17 von 60) (Englisch)

39850

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

1024

MEMORY CARD RECORDING

Basic Shooting (Snapshot)

You can use your camcorder as a digital still camera for

taking snapshots.

Perform the procedures listed below before continuing.

● Power (੬ pg. 7)

● Grip Adjustment (੬ pg. 8)

● Viewfinder Adjustment (੬ pg. 8)

● Loading A Memory Card (੬ pg. 11)

● Picture Quality/Image Size Setting (੬ pg. 11)

1 Set the VIDEO/MEMORY Switch t to “MEMORY”,

then set the Power Switch @ to “ ” or “ ” while

pressing down the Lock Button $ located on the

switch. Open the LCD monitor fully or pull out the

viewfinder fully.

2 Press SNAPSHOT 9. “PHOTO” Q appears while

the snapshot is being taken.

The image is recorded on the memory card.

• Still images are recorded in the snapshot mode with

no frame.

To Delete Unwanted Still Images . . .

..... when unwanted still images are stored in the

memory card or its memory is full, refer to

“Deleting Files” (੬ pg. 20) and delete unwanted

still images.

To Remove The Shutter Sound . . .

..... when you do not want to hear the shutter sound,

set “BEEP” to “OFF” in the Menu Screen

(੬ pg. 34). The sound is no longer heard from the

speaker.

NOTES:

● Even if “DIS” is set to “ON” (੬ pg. 33), the Stabiliser will

be disabled.

● If Snapshot recording is not possible, “PHOTO”

Q blinks

when SNAPSHOT 9 is pressed.

● If Programme AE with special effects (

੬ pg. 27) is

engaged, certain modes of Programme AE with special

effects are disabled during Snapshot recording. In such a

case, the icon blinks.

● If shooting is not performed for approx. 5 minutes when

the Power Switch

@ is set to “ ” or “ ” and power is

supplied from the battery pack, the camcorder shuts off

automatically to save power. To perform shooting again,

close the LCD monitor and re-open it. When using the

viewfinder, push back it in and pull it out again.

● The Motor Drive mode (

੬ pg. 29) is disabled when the

VIDEO/MEMORY Switch t is set to “MEMORY”.

● When a cable is connected to the S/AV connector

&, the

shutter sound is not heard from the speaker, however it is

recorded onto the tape.

● Still images taken are compliant to DCF (Design rule for

Camera File system). They do not have any compatibility

with devices which are not compliant to DCF.

Display

Shooting icon

੬ pg. 54, 55

Image Size

੬ pg. 11

Remaining number of shots

੬ pg. 54, 55

(Approximate Number of

Storable Images

੬ pg. 18)

Picture Quality

੬ pg. 11

Card icon

੬ pg. 54, 55

To Protect Valuable Files (available only for SD

Memory Card) . . .

..... slide the write/erase protection tab on the side

of the memory card in the direction of “LOCK”.

This prevents the memory card from being

recorded over. To record on this memory card,

slide the tab back to the position opposite to

“LOCK” before loading it.

Write/erase

protection tab

01 DX300/100/95/75EK_EN 17-24 2/26/03, 7:12 PM17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX95 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX95

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info