Bedienungsanleitung JVC GR-DX95 (Seite 30 von 60) (Englisch)

39850

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

FOR RECORDING

Manual Focus

To obtain correct focus.

1 If you are using the viewfinder, you should already

have made the necessary viewfinder adjustments

(੬ pg. 8).

2 Set the Power Switch @ to “ ” while pressing

down the Lock Button $ located on the switch, then

press FOCUS r (੬ pgs. 52 and 53). The manual

focus indicator appears.

3 To focus on a farther subject, press + 5 . “ ” R

appears and blinks.

To focus on a nearer subject, press – 5. “ ” R

appears and blinks.

4 Press SELECT/SET 3. Focus adjustment is

complete.

To reset to Auto Focus, press FOCUS r twice or set

the Power Switch @ to “ ”.

If FOCUS r is pressed once, the camcorder will enter

the focus adjustment mode again.

NOTES:

● Be sure to focus the lens in the maximum telephoto

position when you use the Manual Focus mode. If you

focus in on a subject in the wide-angle position, sharply

focused images cannot be obtained when zoomed up

because the depth-of-field is reduced at longer focal

lengths.

● When the focus level cannot be adjusted any further or

closer, “

” or “ ” will blink.

Exposure Control

Manual exposure adjustment is recommended in the

following situations:

• When shooting using reverse lighting or when the

background is too bright.

• When shooting on a reflective natural background

such as at the beach or when skiing.

• When the background is overly dark or the subject

light.

1 Set the Power Switch @ to “ ” while pressing

down the Lock Button $ located on the switch. Open

the LCD monitor fully or pull out the viewfinder fully.

2 Press MENU 4. The Menu Screen appears.

3 Press + or – 5 to select “ (EXPOSURE)”, then

press SELECT/SET 3.

4 Press + or – 5 to select “MANUAL”, then press

SELECT/SET 3. The Menu Screen disappears. The

exposure control indicator appears.

5 Press + 5 to brighten the image, or – 5 to darken

the image. (maximum ±6)

6 Press SELECT/SET 3. Exposure adjustment is

complete.

To Return To Automatic Exposure Control . . .

..... select “AUTO” in step 4. Or, set the Power Switch

@ to “ ”.

To Brighten The Subject Quickly . . .

..... press BACKLIGHT w. r is displayed and the

subject is brightened. If pressed again, r

disappears and the brightness returns to the

previous level.

• +3 exposure has the same effect as the BACKLIGHT

Button w.

• Using BACKLIGHT w may cause the light around the

subject to become too bright and the subject to

become white.

• Backlight compensations is also available when the

Power Switch @ is set to “ ”.

NOTE:

You cannot use the manual exposure control at the same

time with backlight, spotlight (੬ pg. 27) compensation and

“SNOW” (

੬ pg. 27).

While focusing on

a nearer subject

While focusing on

a further subject

Focus detection zone

01 DX300/100/95/75EK_EN 25-34 2/26/03, 7:12 PM30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DX95 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DX95

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info