Bedienungsanleitung JVC GR-FXM49 (Seite 23 von 28) (Englisch)

595807

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ADVANCED FEATURES

Night-Scope (GR-SXM49/SX25 only)

Makes dark subjects or areas even brighter than

they would be under good natural lighting.

1) Set the Power Switch

@ to “ ” or “ ” while

pressing down the Lock Button

! located on the

switch.

2) Press NIGHT

q repeatedly until the desired

mode appears.

A NIGHT AUTO: The shutter speed is

automatically adjusted (maximum 1/2 sec.).

1 NIGHT 20X (only when the Power Switch @

is set to “ ”): The shutter speed is set to 2/5th of

a second to provide 20 times the sensitivity.

2 NIGHT 50X (only when the Power Switch @

is set to “ ”): The shutter speed is set to 1 second

to provide 50 times the sensitivity.

LIGHT (only when the Power Switch @ is

set to “

”): The camcorder’s light is on and the

shutter speed is automatically adjusted (maximum

1/2 sec.).

• To cancel the effect, press NIGHT

q repeatedly

until “OFF” appears.

• During Night-Scope, the following cannot be

activated: “Picture Stabiliser”, “Programme AE

With Special Effects”, “Digital Effects” and “S.LX”

in SYSTEM MENU (

 pg. 20).

• Night-Scope does not work when the Video Light

mode is set to “AUTO” or “ON” (

 pg. 13, “Video

Light”).

• During Night-Scope, it may be difficult to bring the

camcorder into focus. To prevent this, use of a

tripod is recommended.

Fade/Wipe Effects

Fade- or wipe-in works at recording start, and fade-

or wipe-out works at recording end.

1) Set the Power Switch

@ to “ ” while pressing

down the Lock Button

! located on the switch.

2) Press FADE/WIPE

w repeatedly until the

desired mode appears.

3) Press the Recording Start/Stop Button

0 to

activate fade-in/out or wipe-in/out.

• Pressing and holding the Recording Start/Stop

Button

0 allows you to vary the length for the

image during fade in/out or wipe in/out.

• To cancel a fade or wipe, press FADE/WIPE

repeatedly until “OFF” appears.

FADER: Fades in/out to a black screen.

MOSAIC (Fader): Gradually turns/returns the

picture into/from a mosaic pattern.

SHUTTER (Wipe): A black screen moves in

from the top and bottom, closing over the image

like a shutter, or a new image pushes open the

black screen vertically from the centre.

SLIDE (Wipe): A black screen moves in from

the left to gradually cover the image, or a new

image moves in from right to left.

DOOR (Wipe): Wipes in as the two halves of

a black screen open to the left and right, revealing

the scene, or wipes out and the black screen

reappears from left and right to cover the scene.

CORNER (Wipe): Wipes in on a black screen

from the upper right to the lower left corner,

revealing the scene, or wipes out from lower left to

upper right, leaving a black screen.

WINDOW (Wipe): Wipes in on a black screen

from the centre of the screen towards the corners,

revealing the scene, or wipe out from the corners

to the centre, leaving a black screen.

GR-SXM49EK_EN 02.10.18, 11:0023

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-FXM49 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info