Bedienungsanleitung JVC GR-HD1 (Seite 33 von 92) (Englisch)

595808

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

EN 33

Master Page: Right

By resetting the file name, a new folder will be

made. The new files you are going to make will be

stored in the new folder. It is convenient to separate

the new files from previously made files.

1 Load a memory card. (墌 pg. 19)

2 Set the Playback Mode Switch to “MEMORY”.

3 Set the Power Switch to “P” while pressing

down the Lock Button located on the switch.

4 Open the LCD monitor fully, or pull out the

viewfinder fully.

● The still image which has been played back at

the last time is displayed.

5 Press the MENU Wheel in. The Menu Screen

appears.

6 Rotate the MENU Wheel to select “NO. RESET”,

and press it. The NO. RESET screen appears.

7 Rotate the MENU Wheel to select “EXECUTE”,

and press it. The new folder (such as

“101JVCGR”) will be made and the file made of

the next shot starts from DVC00001.

Folder and File names

Each time shooting takes place, a file name is made

using a number which is larger by one than the

largest number of the file names which are in use.

Even if you delete an image file with a number in the

middle of range, the number will not be used for a

new shot; a gap will remain in the numerical

sequence. If the file name reaches DVC09999, a

new folder (such as “101JVCGR”) will be made and

the file name will start again from DVC00001.

This camcorder is compatible with the DPOF

(Digital Print Order Format) standard in order to

support future systems such as automatic printing.

You can select one of the 2 print information settings

for images stored in the memory card: “To Print All

Still Images (One Print For Each)” or “To Print By

Selecting Still Images And Number Of Prints”.

NOTES:

● If you load a memory card already set as shown

below in a printer compatible with DPOF, it will

make prints of the selected still images

automatically.

● To print images recorded on a tape, first dub them

to a memory card. (墌 pg. 57)

To Print All Still Images (One Print For Each)

Load a memory card. (墌 pg. 19)

2 Set the Playback Mode Switch to “MEMORY”.

3 Set the Power Switch to “P” while pressing

down the Lock Button located on the switch.

4 Open the LCD monitor fully, or pull out the

viewfinder fully. The still image which has been

played back at the last time is displayed.

5 Press the MENU Wheel in. The Menu Screen

appears.

6 Rotate the MENU Wheel

to select “DPOF”, and

press it. The Sub Menu

appears.

7 Rotate the MENU Wheel

to select “ALL 1”, and

press it. The DPOF screen

appears.

8 Rotate the MENU Wheel

to select “EXECUTE”, and

press it. The normal

playback screen appears.

● To cancel selection,

select “RETURN”.

Resetting The File Name Setting Print Information (DPOF

Setting)

DPOF

RENT

ALL 1

RESET

RETURN

CUR

DPOF

EXECUTE

ALL1?

RETURN

DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK

CONTINUED ON NEXT PAGE

GR-HD1US.book Page 33 Monday, April 14, 2003 5:21 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-HD1 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info