Bedienungsanleitung JVC GR-X5AC (Seite 14 von 64) (Englisch)

46752

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

GETTING STARTED

14 EN

MasterPage: Left

NOTES:

● Recording time is reduced significantly under the

following conditions:

• Zoom or record-standby mode is engaged

repeatedly.

• The LCD monitor is used repeatedly.

• The playback mode is engaged repeatedly.

● Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the

planned shooting time.

TTENTION:

Before detaching the power source, make sure that

the camcorder’s power is turned off. Failure to do so

can result in a camcorder malfunction.

Data Battery System

You can check the remaining battery power and

the recordable time.

1) Make sure the battery is attached and the

power switch is set to “OFF”.

2) Open the LCD monitor fully.

3) Press DATA, and the battery status screen

appears.

● It is displayed for approx. 3 seconds if the

button is pressed and released quickly, and for

approx. 15 seconds if the button is pressed

and hold for several seconds.

● If “COMMUNICATION ERROR” appears

instead of the battery status even though you

tried to press DATA several times, there may

be a problem with your battery. In such a case,

consult your nearest JVC dealer.

● The recordable time display should only be

used as a guide. It is displayed in 10 minute

units.

Using AC Power

Perform step 4 in “Charging the Battery Pack”.

NOTE:

The provided AC adapter features automatic voltage

selection in the AC range from 110 V to 240 V.

About Batteries

DANGER! Do not attempt to take the batteries

apart, or expose them to flame or excessive

heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its

terminals to come in contact with metals, as this

can result in a short circuit and possibly start a

fire.

To resume the original function of the

accurate battery power indication

If the battery power indication differs from the

actual operating time, fully charge the battery, and

then run it down. However this function may not

turn back if the battery was used for a long period

of time under extremely high/low temperature

condition or charged too many times.

To turn on the camcorder, set the power switch

to any operation mode except “OFF” while

pressing down the lock button located on the

switch. The POWER/CHARGE lamp lights.

Choose the appropriate operation mode

according to your preference using the power

switch and VIDEO/MEMORY switch.

Operation Mode

Power Switch Position

A (Full Auto Recording):

Allows you to record using NO special effects

or manual adjustments. Suitable for standard

recording.

The “A” indicator appears on the display.

M (Manual Recording):

Allows you to set various recording functions

using the menus. (੬ pg. 33)

If you want more creative capabilities than full

auto recording, try this mode.

OFF:

Allows you to switch off the camcorder.

PLAY:

● Allows you to play back a recording on the

tape.

● Allows you to display a still image stored in

the memory card or to transfer a still image

stored in the memory card to a PC.

● Allows you to set various playback functions

using the menus. (੬ pg. 33)

POWER/

CHARGE Lamp

VIDEO/MEMORY

Power Switch

Lock Button

DATA

GR-XASIA.book Page 14 Tuesday, April 12, 2005 8:52 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-X5AC Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info