Bedienungsanleitung JVC GRDVL308 (Seite 17 von 80) (Englisch)

27273

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

EN17

RECORDING

Basic Recording For Digital Still Camera (D.S.C.)

Basic Shooting (Snapshot)

You can use your camcorder as a Digital Still Camera for

taking snapshots.

NOTE:

You should already have performed the procedures listed

below. If not, do so before continuing.

●

Power (

੬

pg. 6)

●

Grip Adjustment (

੬

pg. 8)

●

Viewfinder Adjustment (

੬

pg. 8)

●

Loading A MultiMediaCard (

੬

pg. 11)

●

Picture Quality Mode Setting (

੬

pg. 12)

SNAPSHOT MODE SELECTION

Set the VIDEO/DSC Switch to “ ”, then set the

Power Switch to “ ” or “ ” while pressing down

the Lock Button located on the switch.

Choose the appropriate Snapshot mode from the 5

available by repeatedly pressing MODE until the

desired snapshot mode indicator appears.

•The available Snapshot modes are the same as

those on pg. 16.

SNAPSHOT RECORDING

Press SNAPSHOT.

The image is stored in the MultiMediaCard.

To Delete Unwanted Still Images . . .

.... when unwanted still images are stored in the

MultiMediaCard or its memory is full, refer to

“Deleting Images” (੬ pg. 38) and delete unwanted

still images.

NOTES:

●

Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot

recording will be performed in the FULL mode during

Digital Zoom.

●

Even if “DIS” is set to “ON” (

੬

pg. 24), the Stabiliser

will be disabled.

●

If Snapshot recording is not possible, “PHOTO” blinks

when SNAPSHOT is pressed.

●

The Motor Drive mode (

੬

pg. 16) is disabled when the

VIDEO/DSC Switch is set to “ ”.

●

If Programme AE with special effects (

੬

pg. 28) is

engaged, certain modes of Programme AE with special

effects are disabled during Snapshot recording. In such a

case, the icon blinks.

●

If shooting is not performed for approx. 5 minutes when

the Power Switch is set to “ ” or “ ” and power is

supplied from the battery pack, the camcorder shuts off

automatically to save power. To perform shooting again,

set the Power Switch to “OFF”, then to “ ” or “ ”.

●

Still images taken are compliant to DCF (Design rules for

Camera File systems). They do not have any

compatibility with devices which are not compliant to

DCF.

Power Switch

SNAPSHOT Button

Lock Button

VIDEO/DSC Switch (Open the

LCD monitor to access this switch.)

MODE

Button

STD

10/50

Number of shots taken

Displays the number of images that

have already been shot.

Total number of shots

Displays the approximate total number of shots that

can be stored, including those already taken. The

number increases or decreases depending on the shots

stored, the Picture Quality mode, etc.

Picture Quality mode

Displays the Picture Quality mode of the stored

image. There are 2 modes available:

FINE and STD (Standard) (

੬ pg. 12).

Display

Shooting icon

Appears and blinks during shooting.

Card icon

Appears during shooting and blinks when a

MultiMediaCard is not loaded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GRDVL308 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info