Bedienungsanleitung JVC GY-DV500 (Seite 61 von 96) (Englisch)

34423

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

10. S.S.F. (Super Scene Finder) FUNCTION

CUE Mode

Set the S.S.F. mode as CUE mode.

Set the VCR Setup Menu item No. 398 S.S.F. MODE to

"CUE".

☞ See page 69.

• The CUE mode is indicated in the lower part of the Status

1 screen in the viewfinder.

MARK Mode

Set the S.S.F. mode as MARK mode.

Set the VCR Setup Menu item No. 398 S.S.F. MODE to

"MARK".

☞ See page 69.

• The MARK mode is indicated in the lower part of the

Status 1 screen in the viewfinder.

AUTO

WHITE

SKIN

AREA

ACCU

FOCUS

TAKE

VTR

ZEBRA

AUDIO

LEVEL CH-1

OFF

TAKE button

VTR trigger button

Press the VTR trigger button to start the recording.

When you reach the point that you want to memorize as

the CUE point, press the TAKE button.

• The time code data of the point where the TAKE button is

pressed is stored in the unit's memory as CUE data.

The LOG button’s LED lights during memorization of the

CUE point and the “∗” mark is shown in the viewfinder.

Ⅲ Press the TAKE button each time you reach a point that

you want to memorize as CUE data.

Stop the recording.

Press the VTR trigger button.

Press the VTR trigger button to start the recording.

When you reach the scene that you want to memorize, press

the TAKE button.

• The time code data of the point where the TAKE button is

pressed is stored in the unit's memory as the start point

of the scene.

When you reach the scene that you want to memorize as

the ending point, press the TAKE button again.

• The time code data of the point where the TAKE button is

pressed is stored in the unit's memory as the ending point

of the scene.

• The LOG button’s LED lights during memorization of the

IN point and the “∗” mark is shown in the viewfinder.

The LOG button’s LED remains off during memorization

of the OUT point and the “∗” mark is not shown in the

viewfinder.

Ⅲ For each scene that you want to memorize, repeat steps

and

Stop the recording.

Press the VTR trigger button.

10-2 How to Use the S.S.F. Function

ACCU - FOCUS

F5.6

STBY 4V21.<60

CH1 ----+--

CH2 ----+--

C909

ACCU - FOCUS

F5.6

STBY 4V21.<60

CH1 ----+--

CH2 ----+--

M909

Number of

memorized

scenes

MARK mode

Note:

• Once the S.S.F. data has been written to a videocassette, it is not possible to record S.S.F. data to the tape again.

• Once a tape with recorded S.S.F. data is rewound but not ejected before playback or recording is performed on it again, the

previous S.S.F. data cannot be automatically erased when S.S.F. data are recorded (when you overwrite the previous image).

Therefore, the S.S.F. data of the overlapped sections will not correspond to the video image.

Furthermore, please note that the time code data may differ from the actual data if recording is started in the CUE mode in

this situation.

Number of

memorized

scenes

* This indicator

is not indicat-

ing the number

of the CUE

point.

CUE mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GY-DV500 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info