Bedienungsanleitung JVC GY-HM600U (Seite 91 von 136) (Englisch)

532498

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

EEI Limit

For setting the shutter speed control range when

EEI is enabled.

[Setting Values: 4F-stop, R3F-stop, 2F-stop]

Smooth Trans

For setting the shock reduction function, which

slows down the sudden change when switching

with the [GAIN] or [WHT BAL] selection switch.

[Setting Values: Fast, Middle, Slow, ROff]

Memo :

However, this function is disabled when the

[FULL AUTO] switch is set to “ON”, or when

switching the gain selection switch that was set

to “ALC”.

GAIN L/GAIN M/GAIN H

For setting the gain value of each position on the

[GAIN] selection switch.

This is fixed at “ALC” when the [FULL AUTO] switch

is set to “ON”.

[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,

9dB, 6dB, 3dB, 0dB, -3dB, -6dB]

(Default values GAIN L: -6dB, GAIN M: 0dB, GAIN

H: 9dB)

AE LEVEL SW

For specifying the operation of the cross-shaped

button (HI) on the right side.

AE LEVEL/VFR:

Sets the number of frames during Variable

Frame Rec, and operates as the AE level setting

button in other cases.

(A P77 [Variable Frame Rec] )

AE Level:

Operates as the AE level setting button at all

times.

Disable:

Disables the button.

[Setting Values: AE LEVEL/VFR, RAE Level,

Disable]

Handle Zoom Speed

This function allows you to set the zoom speed of

the zoom lever at the handle when the [ZOOM FIX/

VAR/OFF] switch is set to “FIX”.

[Setting Values: 1 to 8 (R 5)]

User Switch Set...

For specifying user button related settings.

(A P91 [User Switch Set Item] )

User Switch Set Item

USER1 - USER7, LCD KEY▲/LCD KEY▶/LCD

KEY▼/LCD KEY◀

By assigning one of the following functions to each

of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE

LOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7]

buttons or the cross-shaped buttons on the LCD

monitor, these buttons can be used to control the

assigned function (on/off, start, switch).

Set according to the shooting conditions. Usable

only in the Camera mode.

[Setting Values: None, Zebra, Marker, Bars, Focus

Assist, OIS, LCD Backlight, Lolux, AE Lock, Spot

Meter, Face Detect, OK Mark, Clip Cutter Trig,

Backup Trig, Clip Review, Load Picture File, White

Balance, Preset Zoom1, Preset Zoom2, Preset

Zoom3]

Lolux

To increase the sensitivity when in dim

surroundings, set a value in the Lolux mode.

[Setting Values: 36dB, R30dB]

Clip Review

For specifying the operation when any of the

[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],

[LCD KEY▼], or [LCD KEY◀] items is set to “Clip

Review”.

Last 5sec:

Views about 5 seconds of the clip from the

ending.

Top 5sec:

Views about 5 seconds of the clip from the

beginning.

Clip:

Views the entire clip.

[Setting Values: RLast 5sec, Top 5sec, Clip]

Memo :

This item is selectable when any of the [USER1]-

[USER7], [LCD KEY▲], [LCD KEY▶], [LCD

KEY▼], [LCD KEY◀] items is set to “Clip

Review”.

Menu Display and Detailed Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GY-HM600U Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GY-HM600U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info