Bedienungsanleitung JVC GY-HM600U (Seite 102 von 136) (Englisch)

532498

102

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Audio Set Item

Input1 Mic Ref.

For setting the reference input level when the

[INPUT1] selection switch is set to “MIC” or “MIC

+48V”.

[Setting Values: -62dB, -56dB, R-50dB, -44dB,

-38dB]

Input2 Mic Ref.

For setting the reference input level when the

[INPUT2] selection switch is set to “MIC” or “MIC

+48V”.

[Setting Values: -62dB, -56dB, R-50dB, -44dB,

-38dB]

Int. Mic Gain

For setting the sensitivity of the built-in microphone.

[Setting Values: +12dB, +6dB, R0dB]

AUX Gain

For setting the sensitivity of the [AUX] terminal

input.

[Setting Values: +12dB, +6dB, R0dB]

Ref. Level

For setting the audio reference level to be recorded

to the SD card. (Applies to both [CH1/CH2].)

[Setting Values: -12dB, -18dB, R-20dB]

Limiter

For setting the limiter operation.

Ref. Level:

Sets “Ref. Level” to the maximum recording

level.

-8dBFS, -5dBFS:

Sets “-8dBFS” or “-5dBFS” to the maximum

recording level.

Off:

Depending on the settings of the [CH1/CH2

AUTO/MANUAL] selection switches, the

operation may be different as described below.

The limiter does not function when

“MANUAL” is set.

The limiter functions at -5 dBFS when

“AUTO” is set.

[Setting Values: Ref. Level, -8dBFS, R-5dBFS, Off]

AGC Response

Attack Time

Sets the time to activate the limiter.

[Setting Values: Fast, RMiddle, Slow]

Decay Time

Sets the time to deactivate the limiter operation.

[Setting Values: Fast, RMiddle, Slow]

AGC Mode

For setting whether to link the limiter operation of

[CH1] and [CH2].

Select “Link” to link or “Separate” to separate.

[Setting Values: Link, RSeparate]

Memo :

Enabled only when both the [AUX] input terminal

and [INPUT1/INPUT2] input terminal are set to

“LINE” or “MIC”, and CH1/CH2 of the [CH1/CH2

AUTO/MANUAL] switch is set to “AUTO”.

XLR Manual Level

For setting whether to link manual audio

adjustment operation between [INPUT1] and

[INPUT2] terminals.

Select “Link” to link or “Separate” to separate.

[Setting Values: Link, RSeparate]

Memo :

Enabled only when both the [INPUT1/INPUT2]

input terminals are set to “LINE” or “MIC”, and

both [CH1]/[CH2] of the [CH1/CH2 AUTO/

MANUAL] selection switches are set to

“MANUAL”.

Int. Mic Separation

For setting the enhancement level of the stereo

effect of the built-in microphone.

1 to 4:

Enhances the stereo effect. Increasing the value

increases the stereo effect.

Effect off:

Does not enhance the stereo effect.

Mono:

Sets the built-in microphone to monaural.

[Setting Values: 1 to 4, Effect off, Mono (R2)]

Memo :

When any value from 1 to 4 is selected, the

sound quality changes slightly due to the

process of enhancing the stereo effect. This is

normal.

This menu is enabled when the [CH1]/[CH2]

selection switch is set to “INT”.

102

Menu Display and Detailed Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GY-HM600U Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GY-HM600U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info