Bedienungsanleitung JVC GY-HMQ10E (Seite 62 von 72) (Englisch)

532501

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Setting Details

REC MODE For setting the image quality when “SYSTEM SELECT” is in the 1920 mode.

UXP: Enables recording in the best picture quality.

Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs.

XP: Enables recording in high picture quality.

SP: Enables recording in standard quality.

EP: enables long recording.

Memo :

This setting is not available when “SYSTEM SELECT” is set to the 4K2K mode.

This setting is not available when the frame rate is 60p or 50p.

EDGE BLENDING Overlaps the seam of four images when “SYSTEM SELECT” is set to the 4K2K mode.

0 PIXEL: does not overlap the seam of the images during recording.

16 PIXEL: record with the borders overlapped. (A black band will appear on up, down, left and right).

ZOOM Sets the maximum zoom ratio.

10x/OPTICAL: Enables recording with 1 - 10x optical zoom. Set this when dynamic zoom is not desired.

20x/DYNAMIC: Enables recording with 1 - 10x optical zoom and 11 - 20x digital zoom.

Memo :

This setting is not available when “SYSTEM SELECT” is set to the 4K2K mode.

WIND CUT Setting this to “ON” reduces any noise caused by the wind.

Memo :

You can specify a setting for each of the [INPUT1] (microphone), [INPUT2] (microphone), and [MIC]

(microphone/built-in microphone) terminals.

GRID Setting this to “ON” displays gridlines (GRID) to make it easier to detect when the subject appears slanted.

TIME-LAPSE

RECORDING

This function enables the changes of a scene that occur slowly over a long period to be shown within a short

time by taking frames of it at a certain interval.

OFF: disables TIME-LAPSE RECORDING.

1SEC INTERVAL: records a frame at 1-second intervals. Recorded videos are played back at a 30x speed

(when recorded at 60i).

5SEC INTERVAL: records a frame at 5-second intervals. Recorded videos are played back at a 150x speed

(when recorded at 60i).

40SEC INTERVAL: records a frame at 40-second intervals. Recorded videos are played back at a 1200x

speed (when recorded at 60i).

Memo :

Audio cannot be recorded during TIME-LAPSE RECORDING.

DuringTIME-LAPSE RECORDING, zooming and image stabilizer are not available.

When recording is stopped with the recorded time less than “0:00:00:17”, the video will not be saved.

Settings of TIME-LAPSE RECORDING are reset when the power is turned off. To start time-lapse recording

again, it is necessary to make the selection once more.

Recording stops automatically 99 hours after it is started.

Make use of a tripod and AC adapter for TIME-LAPSE RECORDING with long intervals.

It is also recommended to fix the focus and white balance manually.

AUDIO REF. LEVEL For setting the audio reference level.

-20dB: Outputs signals of the reference level when the meter is at -20 dBFS.

-12dB: Outputs signals of the reference level when the meter is at -12 dBFS.

INTERNAL MIC LEVEL For setting the input level of the built-in microphone (-2 (low sensitivity) ~ 0 (standard) ~ +2 (high sensitivity)).

Settings Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GY-HMQ10E Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info