Bedienungsanleitung JVC GZ-RX640 (Seite 6 von 179) (Englisch)

663424

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

Charging

This unit is equipped with a built-in battery.

Open the connector cover, and connect the AC adapter for charging as

shown in the figure.

Caution :

The built-in battery is not charged at the time of purchase.

the time of purchase or in case of the battery is not used for a long period

of time, the charging time will be longer than usual. The camera does not

turn on if the remaining battery power is low. In this case, charge the battery

for more than 40 minutes before turning on the power.

Charging time: Approx. 6 h 10 m (when charging at 25 ℃)

The battery cannot be charged outside the room temperature range of

10°C to 35°C. The CHARGE lamp does not light up when the battery is

not being charged. If the temperature increases or decreases during

charging, the CHARGE lamp will blink slowly and charging will stop. In this

case, remove the AC adapter, press the Reset button and wait until the

room temperature is within the above stated range before charging again.

You can record or play back videos during charging. (However, the

charging time will be longer than usual. In addition, the remaining battery

power may decrease according to conditions.) If the internal temperature

rises when using the unit, stop the charging temporarily. (The CHARGE

lamp goes off.)

If malfunctions (such as overvoltage) occur, charging will stop. In these

cases, CHARGE lamp blinks quickly as a notification.

During charging, the P icon on the screen changes to O to indicate that

charging is in progress. (when the provided AC adapter is used)

When the recording time becomes extremely short even when the battery

is fully charged, the battery needs to be replaced. For details on replacing

the built-in battery (subject to a fee), consult the nearest JVC service

center.

Caution :

There are certain specifications for a USB rechargeable device. To

charge, use a device with the output voltage of 5 V/1 A or more.

Depending

on the specification of your charging device and the thickness

and length of an USB cable used to connect to this unit, the charging time

may be longer than usual, or it may not even start.

We shall not be held liable for malfunctions that are due to using non-

standard device or a device with poor quality.

Resetting this Unit

When a malfunction occurs on this unit, reset the unit in the following way.

(Resetting the unit does not erase the recorded data.)

Open the terminal cover.

Remove the power cord and all connecting cables.

Close the LCD monitor to turn off this unit.

Press the Reset button gently using an object with pointed tip.

Caution :

Press the Reset button just once gently.

not use sharp pointed objects. It may damage the unit or cause electric

shock.

Memo :

If malfunction persists even after pressing the Reset button, consult the

nearest JVC service center.

Getting Started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GZ-RX640 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GZ-RX640

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info