Bedienungsanleitung JVC GZ-RY980 (Seite 135 von 141) (Englisch)

682970

135

Zoom out

Zoom in

Vorherige Seite

1/141

Nächste Seite

Screen/Image

Color and brightness of the screen changes and horizontal

stripes and flickers appear on screen

For images recorded under lighting from fluorescent or mercury lamps,

the color and brightness of the

screen may change and horizontal stripes

and flickers may appear on the screen, but this is not a malfunction.

If the image stabilizer has been set to “On(AIS)”, switch to “On” to improve

the condition.

“Reducing Camera Shake” (A p. 39)

A band or a ball of bright light appears on the LCD monitor.

Change the direction of this unit to prevent the light source from coming

into view. (A band or a

ball of bright light may appear when there is a bright

light source near this unit, but this is not a malfunction.)

The recorded subject is too dark.

Use backlight compensation when the background is bright and the

subject is dark.

“Setting Backlight Compensation” (A p. 30)

Use “Gain Up” in the menu.

“ Gain Up ” (A p. 101)

Set “Brightness Adjust” in the Camera Process menu to the “+” side.

“Adjusting Brightness” (A p. 26)

The recorded subject is too bright.

Set the backlight compensation to “Off” if it is being used.

“Setting Backlight Compensation” (A p. 30)

Set “Brightness Adjust” in the Camera Process menu to the “-” side.

“Adjusting Brightness” (A p. 26)

The use of a commercially available ND filter is recommended for

recording under extremely bright conditions. (Filter diameter: 46 mm)

The color looks strange. (Too bluish, too reddish, etc.)

Wait for a while until natural colors are achieved. (It may take some time

for white balance to be adjusted.)

Configure “White Balance” in the Camera Process menu. Select from

“Fine”/“Cloud”/“Halogen” according to the light source. Select “Preset”

and configure the color temperature to an appropriate setting. Select

“MWB A” or “MWB B” and adjust accordingly.

“Setting White Balance” (A p. 31)

The color looks different.

Configure “White Balance” in the Camera Process menu.

“Setting White Balance” (A p. 31)

There are bright or dark spots on the screen.

While the LCD monitor screen has more than 99.99% effective pixels,

0.01% of the pixels may be bright spots (red, blue, green) or dark spots.

This is not a malfunction. The spots will not be recorded.

Other Problems

The buttons on the touch screen do not work.

Tap the buttons on the touch screen with your fingers.

The buttons may not respond if you touch them with your fingernails or

with gloves on.

Disable “Screen Lock”. You cannot operate

the touch panel when “Screen

Lock” is enabled.

“Locking the Screen” (A p. 37)

The image is grainy.

When digital zoom is used, the image becomes grainy as it is digitally

enlarged.

This unit heats up.

This is not a malfunction. (This unit may become warm when used for a

long time.) Stop using the unit if it gets too warm.

The language on the display changed.

It may occur when you connect this unit to a TV with different language

setting using an HDMI mini cable.

“Operating in Conjunction with TV via HDMI” (A p. 58)

When connected to the TV via the HDMI mini cable, proper

images and sounds are not output.

Images and sounds may not be output properly depending on the TV

connected. In such cases, perform the following operations.

Disconnect the HDMI mini cable and connect it again.

Turn off and on this unit again.

“Connecting via the HDMI Mini Connector” (A p. 57)

HDMI-CEC functions do not work properly, and the TV does

not work in conjunction with this unit.

TVs may operate differently depending on

the specifications, even if they

are HDMI-CEC compliant. Therefore, the HDMI-CEC functions of this unit

cannot be guaranteed to operate in combination with all the TVs. In such

cases, set “HDMI Control” to “Off”.

“ HDMI Control ” (A p. 112)

The media remaining indication blinks without displaying the

time.

The indication blinks while the SD card is being recognized.

The camera takes some time to recognize the SD card when there are

many recorded files on the SD card. In this case, back up the recorded

files on a PC and format the SD card, or insert a new SD card.

“ Format SD Card ” (A p. 114)

This unit does not function properly and error messages

appear.

This unit is a microcomputer-controlled device. Electrostatic discharge,

external noise and interference (from a TV, a radio, etc.) might prevent it

from functioning properly. In such a

case, close the monitor screen to turn

off the power and remove the AC adapter, then press the Reset button to

reset this unit.

“Resetting this Unit” (A p. 131)

Troubleshooting

135

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GZ-RY980 Seite 135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GZ-RY980

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info