Bedienungsanleitung JVC HR-A230E (Seite 11 von 33) (Englisch)

40759

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Manual Tracking

Your video recorder is equipped with automatic tracking

control. During playback, you can override this and adjust the

tracking manually by pressing the TV PROG. buttons.

Your video recorder can automatically play back the whole tape

20 times repeatedly.

Repeat Playback

OVERRIDE AUTOMATIC

TRACKING

Press on the remote to engage manual tracking.

ADJUST TRACKING

MANUALLY

Press TV PROG. + or – to adjust tracking.

RETURN TO AUTOMATIC

TRACKING

Press on the remote to re-engage automatic

tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic

tracking mode automatically.

START PLAYBACK

Press PLAY.

ACTIVATE REPEAT

PLAYBACK

Press PLAY and hold for over 5 seconds, then release.

● The Play indicator ( ) on the display panel blinks

slowly.

● The tape plays 20 times automatically, and then

stops.

STOP PLAYBACK

Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW , FF or PAUSE also stops Repeat Playback.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can

play back NTSC tapes.

LOAD A CASSETTE

Insert a cassette recorded in NTSC.

START PLAYBACK

Press PLAY. “NT” appears on the display panel.

● Some TVs shrink the picture vertically and place

black bars at the top and bottom of the screen. This is

not a malfunction on the part of either the video

recorder or the TV.

● The picture may roll up and down. This can be

corrected using the V-HOLD control found on some

TVs. (This cannot be corrected if the TV does not

have a V-HOLD control.)

● The counter and elapsed tape time readings will be

incorrect.

● During search, still, or frame-by-frame playback, the

picture will be distorted, and there may be a loss of

colour.

● Depending on the type of TV, the top and bottom

portions of superimposed displays may be cut off

during NTSC playback.

Instant ReView

Simply by pressing a single button, the recorder power comes

on, rewinds, and begins playback of the last timer-recorded

programme. If you have several programmes recorded, you can

easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the

Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

Press REVIEW. The recorder power comes on and the

recorder searches for the index code indicating the start

of the last timer-recorded programme. Once it’s found,

playback begins automatically.

The front display panel tells you how many

programmes have been recorded. If you have, for

example, 3 programmes, “REV 3” appears and blinks.

To watch the first of the 3 programmes, press REVIEW

three times. The recorder searches and begins playback

automatically. You can access a programme as far as 9

index codes away from the current tape position.

NOTES:

●

Instant ReView is not possible while the recorder is in the

Timer mode.

●

If you own the A237E or A437E, the number displayed to the

right of "REV" may not match the actual number of timer-

recorded programmes when one or more of them is a PDC/

VPS recording (

੬

pg. 19).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-A230E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info