Bedienungsanleitung JVC HR-A433E (Seite 8 von 33) (Englisch)

40753

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

INITIAL SETTINGS (cont.)

SET CLOCK

AUTOMATICALLY

At the Clock Set display, press PUSH JOG . The Clock

Set display blinks and clock setting begins.

● If the Just Clock channel position isn't set to the

channel position on which Auto Clock data is

received, "Err"(or) appears, and then the display from

step 2 reappears. To set the Just Clock channel

position, press OK until the Just Clock channel

position begins blinking, then cycle through the

numbers by pressing PUSH JOG%ﬁ until the number

representing the channel position in which the station

transmitting clock setting data is stored appears.

RETURN TO NORMAL

DISPLAY

Once clock setting is completed, press CLOCK to return

to the normal display.

Auto Clock Set

SET DATE AND TIME

Press PUSH JOG%ﬁ to set the hour, then press OK. The

“minutes” display begins blinking. Repeat the proce-

dure to set the minutes, day, month and year.

After inputting the year, press OK and the Just Clock

display appears.

SET JUST CLOCK

The default setting is “ON”. Set as desired by pressing

PUSH JOG%ﬁ, then press OK.

● If you set to “OFF”, you can disregard the next step as

you won’t be able to receive regular clock adjust-

ments.

Manual Clock Set

SET CLOCK DATA SOURCE

CHANNEL POSITION

The recorder is preset to receive clock setting and

adjustment data from channel position 1. Press PUSH

JOG%ﬁ to set the channel position to the number

representing the station transmitting clock setting data,

then press OK.

START CLOCK OPERATION

Press CLOCK.

NOTES:

●

Auto Clock and Just Clock require a PDC signal, and will not

operate with a VPS signal.

●

Just Clock (when set to "ON") enables adjustment of the

recorder's built-in clock every hour on the hour, except for 11

o'clock in the evening and midnight.

●

Just Clock is not effective when . . .

– the recorder’s power is on (unless the recorder is tuned to

the same channel position selected in the Just Clock

display).

– the recorder is in the Timer mode.

– a difference of more than 3 minutes exists between the

built-in clock’s time and the actual time.

●

If Just Clock is set to "ON", the recorder’s clock is automati-

cally adjusted at the start/end of Summer Time.

●

Auto clock setting and Just Clock may not function properly

depending on the reception condition.

●

During Manual clock setting, if the day and month data are

invalid (such as 31st April), the month digits are cleared

automatically and the day digits begin blinking. Input the

correct data.

●

If, in step 3 of the Manual Clock Set procedure, the year digits

are automatically cleared and the day digits begin blinking, it

is possible that you have input 29th February for a non-leap

year. Input the correct data.

Year

≠

Day

≠

Month

≠

Hour

≠

Minutes

≠

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-A433E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info