Bedienungsanleitung JVC hr dvs 2 (Seite 72 von 84) (Englisch)

136123

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

123

456

789

Just Clock

The Just Clock function provides accurate time keeping

through automatic adjustments at regular intervals, by

reading data from a PDC signal.

The Just Clock option can be set "ON" or "OFF" at the

Clock Set screen (the default setting is "ON"). Press OK

until the Just Clock setting begins blinking, then press %ﬁ

to change the setting.

IMPORTANT: If you turn the Just Clock function off, the

accuracy of your recorder’s built-in clock may be im-

paired, which could adversely affect timer recording.

TURN THE RECORDER ON

Press .

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS INITIAL SET SCREEN

Move the highlight bar (pointer) to "INITIAL SET" by

pressing %ﬁ, then press OK or

ACCESS CLOCK SET SCREEN

Move the highlight bar (pointer) to "CLOCK SET" by

pressing %ﬁ, then press OK or

. The Clock Set screen

appears.

SET DATE AND TIME

Press %ﬁ to set the time, then press OK or

. The "date"

display begins blinking. Repeat the same procedure to

set the date and year.

● When you set the time, press and hold %ﬁ to

change the time by 30 minutes.

● When you set the date, press and hold %ﬁ to

change the date by 15 days.

SET JUST CLOCK

The default setting is “ON”. Set as desired by pressing

%ﬁ, then press OK or

● For the Just clock function, ੬ "Just Clock" on the left.

● If you set to “OFF”, you can disregard the next step as

you won’t be able to receive regular clock adjustments.

SET CLOCK DATA SOURCE PRESET

The recorder is preset to receive clock setting and

adjustment data from preset position 1. Press %ﬁ to set

the preset position to the number representing the

station transmitting clock setting data (BBC1, BBC2,

etc.), then press OK or

START CLOCK OPERATION

Press MENU.

Clock Set

NOTES:

●

Just Clock (when set to "ON") adjusts the recorder's built-in

clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●

Just Clock is not effective when . . .

– the recorder’s power is on.

– the recorder is in the Timer mode.

– a difference of more than 3 minutes exists between the

built-in clock’s time and the actual time.

●

If Just Clock is set to "ON", the recorder’s clock is automati-

cally adjusted at the start/end of Summer Time.

●

Just Clock may not function properly in poor reception

conditions.

IMPORTANT

If you performed Auto Set Up (੬ pg. 8), Preset Download

(੬ pg. 9) or Auto Channel Set (੬ pg. 64), without ever

having set the clock previously, the recorder's built-in

clock is also set automatically.

Perform the following steps only if —

— Auto Clock Set has not been performed correctly by

Auto Set Up, Preset Download or Auto Channel Set.

— the recorder's memory backup has expired.

— you want to change Just Clock setting (੬ "Just Clock" in

the left column).

INITIAL SET

CLOCK SET

GUIDE PROG SET

SAT CONTROL SET

[

∞

] =

[MENU] : EXIT

CLOCK SET

TIME DATE YEAR

0: 00 01 . 01 00

JUST CLOCK: ON

TV PR. : 1

[

∞

] =

[MENU] : EXIT

Turn on the TV and select the AV mode.

SUBSIDIARY SETTINGS (cont.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr dvs 2 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info