Bedienungsanleitung JVC HR-E249E (Seite 26 von 52) (Englisch)

485208

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

26 EN

TIMER RECORDING(cont.)

Regular Timer

Programming

Remember, the clock must be set before you can

programme the timer (੬ pg. 41).

If you don’t know the SHOWVIEW number for the programme

you wish to record, use the following procedure to set your

recorder to timer-record the programme. Or you can use the

Illumi-Guide feature, where the remote control tells you which

button to press next by lighting it up. To use the Illumi-Guide

feature, with the TV/SAT./VCR switch set to "VCR", press

ILLUMI GUIDE before performing step 1. (PROG., REW, PLAY,

FF light up at this time.)

If you aren't going to use the Illumi-Guide feature, go directly to

step 1.

Before performing the following steps:

● Insert a cassette with the safety tab in place. The recorder

will come on automatically.

● Turn on the TV and select the VIDEO channel (or AV mode).



ACCESS TIMER

PROGRAMMING SCREEN

Press PROG.

● If you are using the Illumi-Guide feature, the following

buttons will light up: NUMBER keys (0–9), START +/–,

STOP +/–, DATE +/–, TV PROG. +/–, MENU and

CANCEL.

ACCESS PROGRAMME SCREEN

Press START +/–. (If you’re

just starting out, “P1”

appears.)

The front display panel looks like this:

● If you are using the Illumi-Guide feature, the following

buttons will light up: START +/–, STOP +/–, DATE +/–,

TV PROG. +/– and MENU.

ENTER PROGRAMME START TIME

Press START +/– to enter

the time you want

recording to start.

● Press and hold START

+/– to move in 30-

minute increments, or

press and release

repeatedly to move 1

minute at a time.

The front display panel looks like this:

● If you are using the Illumi-Guide feature, the following

buttons remain lit: START +/–, STOP +/–, DATE +/–,

TV PROG. +/– and MENU.

ENTER PROGRAMME STOP TIME

Press STOP +/– to enter the time you want recording to

stop.

● If you are using the Illumi-Guide feature, the following

buttons remain lit: START +/–, STOP +/–, DATE +/–,

TV PROG. +/– and MENU.

– P1 –

START STOP

–:– – = –:– –

DATE TV PROG

25.12 – –

[+/–] =

[MENU] : EXIT



– P1 –

START STOP

21:00 = –:– –

DATE TV PROG

25.12 – –

[+/–] =

[MENU] : EXIT



When Using The Illumi-Guide Feature

● Buttons light or blink on the remote control for

approximately 10 seconds. If the button or buttons extinguish

during timer programming, press ILLUMI GUIDE and the

button or buttons previously lit or blinking come back on. If

the button or buttons do not re-light or start blinking again,

press MENU and re-perform the timer programming

procedure from the beginning.

● If for some reason the remote control's signal is not received

by the video recorder, press MENU and re-perform the timer

programming procedure from the beginning.

START+/–

STOP+/–

PROG./MENU

TV/SAT./VCR

ILLUMI GUIDE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-E249E Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info