Bedienungsanleitung JVC hr j 880 (Seite 55 von 80) (Englisch)

136223

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Masterpage:Right-NoTitle0

Filename [HRJ880EU3.fm]

Page 55 May 18, 2001 2:45 pm

Locate the start point.

Locate the end point.

Prepare the recording deck.

Engage its Record-Standby mode.

Start Random Assemble Editing.

Press

● Automatic editing begins; all the specified scenes are copied

to the recording deck in the order they were registered.

● The on-screen display remains while your recorder searches

for each scene (blinking cursor indicates scene currently being

searched for), but disappears during actual editing.

● During scene search, the recording deck automatically enters

its Record-Standby mode.

● When all registered scenes have been edited, your recorder

enters the Pause mode, the recording deck enters its

Record-Standby mode, and the cursor blinks at the next

available number.

End Random Assemble Editing.

Press

to return to the normal screen, and engage

the Stop mode for your recorder and for the recording

deck.

To Make Corrections ...

... in step

, you can cancel registered in and out points by

pressing

. Each time you press, the preceding point is erased.

● If, for example, you have registered 5 sets of in and out points

and want to reset the first set, you have to press

until all

points after the first set have been erased. Reenter them after

you have repaired the first set of points.

NOTES:

● You can also monitor the sound when searching for scenes you

want to edit in steps

–

. Since you can hear the soundtrack

during selection, you can avoid abrupt or unnatural sounding

scene-to-scene transitions. The sound that is heard, however,

is not TimeScan Audio.

● When editing, there may be a discrepancy of about 2 seconds

on the source tape between the locations you chose as edit-in

and -out points and the locations your recorder recognizes as

those points.

● For any scene, the edit-out point must have a counter reading

that is at least 1 second after the corresponding edit-in point.

Any less than 1 second and the edit-out point will not be

registered.

● Since the source recorder prerolls during Random Assemble

Editing, there must be at least 15 seconds worth of recorded

material prior to any edit-in point on the source tape.

● If the search time for an edit-in point exceeds 5 minutes, the

recording deck enters its Stop mode and editing will not take

place.

● During steps

and

— if you engage the Pause mode while

registering edit-in and -out points in the R.A.Edit screen, the

characters in the on-screen display may become distorted. This

is normal.

Memory Capacity

Random Assemble Editing shares

memory space with the recorder’s

timer. If there are programmes

occupied by timer-recording

data, those spaces cannot be used

to register edit-in and -out points

— meaning you will not be able

to edit 8 scenes.

● When all 8 programmes are

full, “PROGRAM FULL”

appears on the R.A.Edit screen.

● To cancel a programme, see page 32.

RM-V704U Multi-Brand Random Assemble Edit

Controller (Not provided)

By connecting this controller to your recorder’s R.A.EDIT

connector, you can perform Random Assemble Editing in

combination with a second non-JVC video recorder. The

controller is compatible with various major recorder brands. For

compatible systems and availability, please consult your JVC

dealer.

NOTE:

Although the RM-V704U is designed to operate the recording

deck, it may not work with some recorders, or may have limited

function capability.

Find the edit-in point on the

source tape from where you

want the edited scene to

begin by pressing

using the

JOG

dial, then

press

PROG

● The edit-in point is registered

in memory and appears on the

screen.

Find the edit-out point where

you want the edited scene to

end by pressing

or using

the

JOG

dial, then press

PROG

● The edit-out point is registered

in memory and appears on the

screen.

● The total time of the edited

scenes is displayed to the right

of “(+)”.

● Repeat steps

and

for each

additional scene.

HRJ880EU3.fm Page 55 Friday, May 18, 2001 2:54 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr j 880 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info