Bedienungsanleitung JVC hr j 880 (Seite 63 von 80) (Englisch)

136223

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Masterpage:Right-Full-NoTitle0

Filename [HRJ880EU4.fm]

Page 63 May 25, 2001 11:37 am

* The default setting is bold in the table below.

L-2 SELECT

A/V

: To use this recorder as the recording

deck with the player connected to

the AV2 (L-2) IN/DECODER

connector, or to use the satellite

receiver connected to the AV2 (L-2)

IN/DECODER connector.

DECODER

: To use a decoder connected to the

AV2 (L-2) IN/DECODER connector.

SAT

: To view a satellite programme with

the TV set while the recorder is

turned off. (

੬

pg. 57)

Set this function to the appropriate mode depending on the

type of unit connected to the rear panel AV2 (L-2) IN/

DECODER connector of the recorder.

NOTES:

●

If you have a decoder connected to the AV2 (L-2) IN/DECODER

connector, be sure to set “L-2 SELECT” back to “DECODER”

after editing.

●

If you’re not connecting a decoder to the AV2 (L-2) IN/

DECODER connector, leave “L-2 SELECT” set to “A/V”.

●

The default setting is “A/V”; if the recorder’s memory backup has

expired due to a power cut or because the AC was removed

from the recorder, “A/V” will be automatically selected when

the power is restored to the recorder. If you are using a decoder,

be sure to set “L-2 SELECT” back to “DECODER”.

●

When “L-2 SELECT” is set to “SAT”, “SAT” appears on the

screen or front display panel instead of “L-2”.

COLOUR SYSTEM

PAL/NTSC

: To record PAL signals, or play back a

PAL or NTSC tape.

MESECAM

: To record SECAM signals, or play

back a MESECAM tape.

You can play back PAL, NTSC and MESECAM tapes, or

record PAL and SECAM* signals on this recorder. Select the

appropriate colour system.

* SECAM signals will be recorded as MESECAM on this recorder;

MESECAM is the designation for tapes with SECAM signals that

have been recorded on a MESECAM-compatible PAL video

cassette recorder.

NOTES:

●

If “MESECAM” is selected when the tape speed is set to EP

mode, the tape speed will be forced to change to LP mode.

●

It is not possible to select EP mode if “MESECAM” is selected.

About NTSC Playback

●

Some TVs shrink the picture vertically and place black bars at

the top and bottom of the TV screen. This is not a malfunction

on the part of either the video recorder or the TV.

●

The picture may roll up and down. This can be corrected using

the V-HOLD control found on some TVs. (This cannot be

corrected if the TV does not have a V-HOLD control.)

●

The counter and tape remaining time readings will be incorrect.

●

During search, still, or frame-by-frame playback, the picture will

be distorted, and there may be a loss of colour.

●

Depending on the type of TV, the top and bottom portions of

superimposed displays may be cut off during NTSC playback.

HRJ880EU4.fm Page 63 Friday, May 25, 2001 11:37 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr j 880 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info