Bedienungsanleitung JVC HR-J287MS (Seite 14 von 16) (Englisch)

476524

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Page 14 September 3, 2001 9:09 am

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Tuner Setting

IMPORTANT

Perform the following steps only if auto channel set has not been

set correctly by Auto Set Up function or if you have moved to a

different area or if a new station starts broadcasting in your area.

Your recorder needs to memorise all necessary stations in channel

positions in order to record TV programmes. Auto Channel Set

automatically assigns all receivable stations in your area so that

you can call them up with the PR+/– buttons without going

through any vacant channels.

Auto Channel Set

Access Main Menu screen, then Tuner

Set screen

Press MENU on the remote control. Press

to place the pointer next to “TUNER

SET”, then press OK or

Perform Auto Channel Set

Press

to place the pointer next to

“AUTO CH SET”, then press OK or

Select TV system

Press

to place the pointer next to the

appropriate TV system, then press OK or

● Auto Channel Set will start.

Press MENU to return to normal screen.

IMPORTANT

● If no sound accompanies the picture or the audio sounds

unnatural on some channels that have been stored by Auto

Channel Set, the TV system setting for those channels may be

incorrect. Select the appropriate TV system for those channels.

Refer to “TV System Selection — When you see the picture but

the audio can’t be heard or sounds unnatural”.

● Since your recorder memorises all detected stations even if the

reception condition is poor, some of those stored stations may

produce a noisy picture. To delete those stations, refer to

“Delete A Channel”.

Manual Channel Set

Store channels that were not stored during Auto Set Up or Auto

Channel Set.

Access Tuner Set screen

Perform step A of “Auto Channel Set”.

Access channel list

Press

to place the pointer next to “CH EDIT”, then press OK

Select position

Press

to place the pointer next to an open channel position,

then press OK or

Select band

Press

to place the pointer next to the band of your choice,

then press OK to initiate Manual Channel Set.

Recorded tape HR-J281MS/HR-J287MS

Dubbed tape

Playback equipment

Recording circuit

[ / ]

[MENU] : EXIT

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

[ / ]

[MENU] : EXIT

TUNER SET

CH EDIT

AUTO CH SET

[ / ]

[MENU] : EXIT

TV SYSTEM SELECT

B/G

D/K

[ / ] [ ] : DELETE

[ / ] : EDIT

[MENU] : EXIT

AUTO CH SET

PLEASE WAIT

START FINISH

■

– – – – – – –

CH FRQ SYS CH FRQ SYS

01 150 BG 07 229 BG

02 165 BG 08 237 BG

03 195 BG 09 355 BG

04 205 BG 10 365 BG

05 213 BG 11 374 BG

06 221 BG 12 384 BG

[ / ]

[MENU] : EXIT

BAND SELECT

VHF L

VHF H

UHF

[MENU] : EXIT

MANUAL CH SET

PLEASE WAIT

VHF L 300MHZ

– Information on Multi-System Compatibility –

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-J287MS Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info