Bedienungsanleitung JVC HR-S5902 (Seite 2 von 24) (Englisch)

658620

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

—2—

Page 2 November 26, 2002 4:01 pm

Failure to heed the following precautions may result in damage to

the VCR, Remote or video cassette.

1. DO NOT

place the VCR . . .

...in an environment prone to extreme temperatures or

humidity.

...in direct sunlight.

...in a dusty environment.

...in an environment where strong magnetic fields are

generated.

...on a surface that is unstable or subject to vibration.

2. DO NOT

block the VCR’s ventilation openings.

3. DO NOT

place heavy objects on the VCR or on the Remote.

4. DO NOT

place anything which might spill on the top of the

VCR or on the Remote.

5. AVOID

violent shocks to the VCR during transport.

VCR Plus+, C

and PlusCode are registered trademarks of Gemstar

Development Corporation.

The VCR Plus+ system is manufactured under license from

Gemstar Development Corporation.

● Cassettes marked “S-VHS” and “VHS” can be used with this

video cassette recorder. However, S-VHS recordings are

possible only with cassettes marked “S-VHS”.

By using S-VHS ET it is possible to record and play back with

S-VHS picture quality on VHS cassettes with this VCR.

● As an E

NERGY

TAR

Partner, JVC has determined that this product

or product model meets the E

NERGY

TAR

guidelines for energy

efficiency.

IMPORTANT PRODUCT SAFETY

INSTRUCTIONS

Electrical energy can perform many useful functions. But improper

use can result in potential electrical shock or fire hazards. This

product has been engineered and manufactured to assure your

personal safety. In order not to defeat the built-in safeguards,

observe the following basic rules for its installation, use and

servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your

product and its operating instructions. For your safety, please read

all the safety and operating instructions before you operate this

product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A) Your product may be equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way.

This is a safety feature.

If you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

(B) Your product may be equipped with a 3-wire grounding-type

plug, a plug having a third (grounding) pin. This plug will only

fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source

indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your product dealer or local

power company. If your product is intended to operate from

battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or

electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it from

overheating, these openings must not be blocked or covered.

● Do not block the openings by placing the product on a bed,

sofa, rug or other similar surface.

● Do not place the product in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as

recommended by the manufacturer.

ANTENNA INSTALLATION INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product,

be sure the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding connectors, location of

antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

NOTE:

Change or modifications not approved by the party responsible

for compliance could void the user’s authority to operate the

equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio TV technician for

help.

Declaration of Conformity

Model Number: HR-S5902/5912U

Trade Name: JVC

Responsible Party: JVC Americas Corp.

Address: 1700 Valley Road Wayne, N.J. 07470

Telephone Number: 973-317-5000

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

For Customer Use:

Enter below the Model No. and Serial No. which are located

on the rear of cabinet. Retain this information for future

reference.

Model No.

Serial No.

HR-S5902U-EN.fm Page 2 Tuesday, November 26, 2002 4:01 PM

JVC HR-S5902 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info