Bedienungsanleitung JVC HR-S5912U (Seite 19 von 24) (Englisch)

658621

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

— 19 —

Page 19 October 31, 2002 9:59 am

Audio Dubbing

Audio Dubbing replaces the normal audio sound of a previously

recorded tape with a new soundtrack.

Make connections

Connect an audio cable between the VCR’s audio input

connectors and the audio component’s audio output connectors.

● When connecting a monaural audio component, use only the

VCR’s AUDIO L input connector.

● Audio Dubbing is possible by using the audio input connectors

on the front panel or on the rear panel.

Select input mode

Select “F-1” —when connecting the audio component to the

audio input connectors on the front panel.

Select “L-1” —when connecting the audio component to the

audio input connectors on the rear panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Locate start point, and engage Audio Dubbing mode

Load a cassette and press PLAY (4) on the VCR. Press PAUSE (9)

at the point where you want to start dubbing, then press A.DUB.

● The VCR enters the Audio Dubbing Pause mode. “

䡬

” blinks

and “$” lights on the display panel.

Start dubbing

Engage the Play mode of the audio component, then press PLAY

(4) on the VCR. Audio Dubbing begins at this point.

● To pause dubbing, press PAUSE (9). Press PLAY (4) to resume

dubbing.

End Audio Dubbing

Press STOP (8) on the Remote or STOP/EJECT (0) on the VCR,

then engage the Stop mode of the audio component.

NOTES:

● When monitoring the sound during Audio Dubbing, the normal

soundtrack is automatically selected. If you wish to hear the

Hi-Fi or mixed sound (Hi-Fi + normal soundtracks), press

A.MONITOR to select “NORM HI-FI”. (

墌

pg. 9, “Selecting

monitor sound”)

● Audio Dubbing stops automatically when the counter reaches

“0:00:00”, and the VCR enters the Play mode. Check the

counter reading on the screen before dubbing.

● Audio Dubbing is not possible with a cassette whose record

safety tab has been removed.

● When playing back an audio-dubbed tape, press A.MONITOR

to select the soundtrack you wish to hear. (

墌

pg. 9, “Selecting

monitor sound”)

Insert Editing and AV Dubbing

Insert Editing:

You can replace a recorded scene with new scene recorded on

another tape or with other material. Both the picture and the

sound recorded on the Hi-Fi sound track are replaced at the same

time.

AV Dubbing:

You can perform Audio Dubbing and Insert Editing at the same

time. This means that the picture and the sounds recorded on the

Hi-Fi sound track and on the normal track are replaced at the

same time.

● For AV Dubbing, you can edit pictures and sound using different

sources; connect a video source to the video input connector,

and an audio source to the audio input connectors.

Make connections

Connect an audio/video cable between the VCR’s audio/video

input connectors and the other component’s audio/video output

connectors.

● Insert Editing and AV Dubbing are possible by using the audio/

video input connectors on the front panel or on the rear panel.

Select input mode

Select “F-1” —when connecting the other component to the

audio/video input connectors on the front panel.

Select “L-1” —when connecting the other component to the

audio/video input connectors on the rear panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Various connection for editing tapes

The following three methods can be used for editing tapes.

● VHS to S-VHS editing (VIDEO-VIDEO connection):

Although the picture quality is inherently limited by the

original VHS quality, the edited tape has better picture quality

than those made by VHS-to-VHS editing.

● S-VHS to VHS editing (VIDEO-VIDEO connection):

Since the original source is recorded in S-VHS mode, the

edited tape has better picture quality than those made by

VHS-to-VHS editing.

● S-VHS to S-VHS (S-VIDEO connection):

Original picture quality of S-VHS made can be duplicated

with minimal picture degradation. This is the best editing

method you can use on S-VHS VCRs.

To AUDIO input

This VCR

CD player, etc.

To AUDIO output

To S-video output

This VCR (for recording)

Another VCR (for playback)

S-video cable

(supplied)

To S-VIDEO IN

To audio/video output

Audio/video cable

(not supplied)

To AUDIO/VIDEO IN

CONTINUED ON NEXT PAGE

HR-S5902U-EN.fm Page 19 Thursday, October 31, 2002 10:00 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S5912U Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info