474088
52
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
advanced features52
Clock Set
You should only need to perform this function if:
Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
The VCR’s memory backup has expired
You want to change the Just Clock setting
Setting the Clock
get to the initial set screen Press . Move the highlight bar to INITIAL SET using the
PR
and
PR
buttons and press (or E).
get to the clock set screen Move the highlight bar to CLOCK SET using the
PR
and
PR
buttons and press (or E).
set time and date When the CLOCK SET screen appears, the time will be blinking. Use the
PR
and
PR
buttons to set the correct time (pressing and holding will
advance the time in 30minute increments) and then press
(or E). The date will blink. Use the
PR
and
PR
buttons to
set the correct date (pressing and holding will advance the date in
15day increments) and then press
(or E). Set the correct
year in the same way and press
.
set just clock Set as desired using the
PR
and
PR
buttons
then press
(or E).
set preset for clock data source If you have set JUST CLOCK to ON, you will need to
specify a preset (station) for JUST CLOCK to take its source data from. Use the
PR
and
PR
buttons to select the preset and press (or E).
start clock operation Press .
NOTE:
If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
ON, you are
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
when the VCR is powered on
when the VCR is in Timer or Auto Satellite Programme Recording modes
when a difference of more than 3minutes between the internal clock and the time signal exists.
when reception conditions are poor.
[1] a k
[MENU]: EXIT
CLOCK SET
TIME DATE YEAR
0: 00 01 . 01 03
JUST CLOCK : ON
TV PR. : 1
HR-S5965/5966EK-EN/p52-59 2/19/03, 04:12 PM52
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC HR-S5965 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info