Bedienungsanleitung JVC HR-S7500U (Seite 25 von 76) (Englisch)

658627

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN 25

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is

engaged. If tracking noise appears in the picture, you can

override this and make the adjustment manually.

ENGAGE MANUAL

TRACKING MODE

During playback, press the CH

and

∞

buttons on the

VCR's front panel simultaneously to cancel the

automatic tracking mode and enable manual tracking

adjust.

ADJUST MANUAL

TRACKING

Press CH

(+) or

∞

(–) on the VCR's front panel or

remote. Press briefly for fine adjust, or press and hold for

coarse adjust. Watch the screen and continue adjusting

until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC

TRACKING

Press the CH

and

∞

buttons on the VCR's front panel

simultaneously.

● When automatic tracking is re-engaged, Video

Calibration is automatically activated.

NOTES:

●

To obtain a noiseless still picture it may be necessary to adjust

tracking in slow playback and then engage Pause.

●

Manual tracking is possible during hands-free slow-motion.

During hands-free slow-motion playback, simply press CH

(+) or

∞

(–) on the VCR's front panel or remote to adjust

tracking.

Index Search

Index codes are placed on the tape at the start of each

recording. You can find and automatically play back from the

start of any recording using the Index Search function.

START SEARCH

While the tape is stopped, press TIME SCAN ™ or

£ (

ACCESS DISTANT CODE

To access a recording 2–9 index codes away, press

TIME SCAN ™ or £ (

) repeatedly until the

correct number is displayed on screen (only if "SUPER-

IMPOSE" is set to "ON" (Z pg. 28). Playback begins

automatically when the desired recording is located.

● If necessary press REW or FF when play starts to

search visually to find the very beginning of the

desired program.

NOTE:

An index code is not placed on the tape when recording is

paused and then resumed.

High-Speed Search

ACTIVATE HIGH-SPEED

During playback or still, press FF for forward high-

speed search, or REW for reverse high-speed search.

● The search speed is 7 times normal playback speed

with SP recordings, and 21 times normal with EP

recordings.

● TimeScan will be automatically engaged during high-

speed search with an SP-recorded tape.

● If the tape speed changes from SP to EP during high-

speed search the TimeScan mode will change to EP

search mode.

● During high-speed search with an EP-recorded tape,

pressing TIME SCAN for the opposite direction or

turning the TIME SCAN SHUTTLE ring to the

opposite direction changes it to 7x-speed TimeScan

search. (Z pg. 35)

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still, press and hold FF or

REW for over 2 seconds. When released, normal playback

resumes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7500U Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info