Bedienungsanleitung JVC HR-S7600U (Seite 52 von 76) (Englisch)

658626

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

52 EN

ACCESS MAIN MENU

SCREEN

Press MENU.

ACCESS FUNCTION SET

SCREEN

Move the highlight bar (arrow) to "FUNCTION SET" by

pressing CH

∞

or TIME SCAN

ﬁ

, then press OK or

TIME SCAN

SELECT AUTO TIMER SET

MODE

Move the highlight bar

(arrow) to "AUTO TIMER"

by pressing CH

∞

TIME SCAN

ﬁ

, then

press OK or TIME SCAN

to set to "ON" or "OFF".

RETURN TO NORMAL

SCREEN

Press MENU.

Auto Timer

When the Auto Timer is set to “ON” the timer is automatically

engaged when the VCR's power is turned off. It is automatically

disengaged when the VCR is powered back on.

Auto SP=EP Timer

If, when recording in SP mode, there is not enough tape to record

the entire program, the VCR automatically switches to EP mode

to allow complete recording. This feature is especially handy

when recording a program of more than 2 hours in length.

For Example . . .

Recording a program of 140 minutes in length onto a 120-

minute tape

Make sure you set "AUTO SP=EP TIMER" to “ON” at the

Function screen before the timer recording starts.

Approximately 110 minutes

SP mode

Approximately 30 minutes

EP mode

Total 140 minutes

ACCESS MAIN MENU

SCREEN

Press MENU.

ACCESS FUNCTION SET

SCREEN

Move the highlight bar (arrow) to "FUNCTION SET" by

pressing CH

∞

or TIME SCAN

ﬁ

, then press OK or

TIME SCAN

SELECT AUTO SP=EP

TIMER SET MODE

Move the highlight bar

(arrow) to "AUTO SP=EP

TIMER" by pressing CH

∞

or TIME SCAN

ﬁ

then press OK or TIME

SCAN

to set to "ON".

RETURN TO NORMAL

SCREEN

Press MENU.

NOTES:

●

If you have programmed the VCR to timer-record 2 or more

programs, the second program and those thereafter may not

fit on the tape if you set the Auto SP

EP Timer mode to

"ON". In this case, make sure the mode is not engaged, then

set the tape speed manually during timer programming.

●

In order to ensure that the recording fits on the tape, this

feature may leave a slight non-recorded section at the end of

the tape.

●

There may be some noise at the point on the tape where the

VCR switches from SP to EP mode.

●

The Auto SP

EP Timer feature is not available during ITR

(Instant Timer Recording), and the feature will work with the

following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120.

NOTE:

For safety, when AUTO TIMER is set to “OFF”, all other VCR

functions are disabled while the Timer mode is engaged. To

disengage the timer, press TIMER.

FUNCTION

VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

AUTO TIMER OFF

SUPERIMPOSE ON

= AUTO SP

=EP TIMER ON

DIGITAL R3 ON

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

FUNCTION

VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

= AUTO TIMER OFF

SUPERIMPOSE ON

AUTO SP=EP TIMER ON

DIGITAL R3 ON

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

TIMER RECORDING (cont.)

HR-S7600U-EN45-64 99.4.28, 2:05 PM52

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7600U Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info