Bedienungsanleitung JVC HR-S7700EU (Seite 27 von 68) (Englisch)

655779

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Masterpage:Right-NoTitle0

Filename [HRS7700EU1.fm]

Page 27 March 8, 2000 1:13 pm

B.E.S.T. Picture

System

The B.E.S.T. (Biconditional Equalised Signal Tracking)

system checks the condition of the tape in use during

playback and recording, and compensates to provide the

highest-possible playback and recording pictures. You

can set “B.E.S.T.” to “ON” or “OFF” to your preference

(

墌

pg. 49).

Playback

The recorder assesses the quality of the tape once you

initiate playback.

● The recorder adjusts the playback picture quality based on the

quality of the tape in use.

● B.E.S.T. is active during automatic tracking. “BEST” appears

blinking on the recorder’s front display panel.

NOTES:

● When watching a tape recorded with “B.E.S.T.” set to “ON”, it

is recommended that you leave B.E.S.T. on during playback as

well.

● When watching a rental tape or one recorded on another

video recorder, or when using this recorder as the player for

editing, set B.E.S.T. to your preference (

墌

pg. 49).

● “BEST” only appears at the beginning of automatic tracking.

Even though it doesn’t appear after that, the B.E.S.T. function is

operative.

Recording

The recorder assesses the quality of the tape once you

initiate recording.

DURING B.E.S.T.

● The recorder spends approximately 7 seconds assessing the

condition of the tape, then begins recording.

NOTES:

● The B.E.S.T. system works for both SP and LP modes only after

a tape has been inserted and the Record mode is first initiated.

It does not work during recording.

● The B.E.S.T. system does not work while Automatic Satellite

Programme Recording is in progress (

墌

pg. 34).

● In the case of timer recordings, the B.E.S.T. system works

before recording is initiated.

● Once the cassette is ejected, the B.E.S.T. data is cancelled. The

next time the cassette is used for recording, B.E.S.T. is re-

performed.

● Pressing the recorder’s

7 button while “BEST” is displayed

does not start Instant Timer Recording (

墌

pg. 24).

ATTENTION

Since the B.E.S.T. system works before recording actually

starts, there is a delay of approximately 7 seconds after

and

4 on the remote control are pressed, or 7 on the

recorder is pressed. To make sure you record the desired

scene or programme in its entirety, first perform the following

steps:

Press and hold

9 and press 7 to engage the Record

Pause mode.

● The recorder then automatically checks the condition of

the tape and, after approximately 7 seconds, re-enters

Record Pause mode.

Press

4 to start recording.

If you want to bypass the B.E.S.T. system and begin recording

immediately, set “B.E.S.T.” to “OFF” (

墌

pg. 49).

B.E.S.T. COMPLETE

HRS7700EU1.fm Page 27 Wednesday, March 8, 2000 1:14 PM

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7700EU Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info