Bedienungsanleitung JVC HR-S7700EU (Seite 58 von 68) (Englisch)

655779

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Filename [HRS7700EU3.fm]

Masterpage:Left

Page 58 March 8, 2000 1:58 pm

SUBSIDIARY SETTINGS (cont.)

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the

RF cable.

If you have connected the recorder to your TV via the AV or S-VIDEO connection (

墌

pg. 8, 9), since you do not need

the video channel you have to set the video channel to off.

If you have connected the recorder to your TV via the RF connection (

墌

pg. 8), you have to set the correct video

channel.

Access the Video Channel Set mode.

Hold down

on the recorder until the front display

panel shows the following.

Set the RF output system.

The blinking number on the display indicates the RF

output system of your country.

●

If you have selected MAGYARORSZÁG (36),

ESKÁ

REPUBLIKA (42), POLSKA (48), РОССИЯ (07) or OTHER

EASTERN EUROPE (EE) for the country setting (

墌

pg. 10, 14),

press

rt to set to “2”.

●

For other countries, set to “1”. Then press

(1: B/G 2: D/K)

Set the video channel.

With AV or S-VIDEO Connection

Press

PR –

until the front display panel shows “1OUT– –”

(or “2OUT– –”).

●

Now the video channel is set to off.

With RF Connection

Press

PR +

–

to set the video recorder to a vacant

channel between 22 and 69 which is not occupied by

any local station in your area.

(Example) If channel 50 is available in your area

Then set your TV to UHF channel 50.

●

If the two vertical white bars appear

clearly on the TV screen as shown to

the right, go to step

●

If the two vertical white bars do not

appear clearly, re-set the video

recorder to another vacant channel

and try again.

NOTES:

●

If you set the video recorder to a channel which is occupied by

a local station or has neighbouring channels that are occupied

by local stations, the picture reception quality will be affected

and some interference noise will appear on the TV screen. Be

sure to select a vacant channel which has no broadcast on

neighbouring channels.

●

If you cannot obtain the two vertical white bars clearly with

any channel between 22 and 69, consult your JVC dealer.

Exit the Video Channel Set mode.

Press

on the remote control.

IMPORTANT

Perform the following steps only if —

— interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your

area.

— you change the connection between your recorder and TV from RF connection to AV or S-VIDEO connection, or vice versa.

Before performing the following steps:

Make sure the recorder’s power is off and there is no cassette inserted in the recorder.

With AV or S-VIDEO Connection

To view picture signals from the video recorder, set

your TV to its AV mode.

With RF Connection

The channel on which the TV screen in step

appears

clearly is your video channel.

To view picture signals from the video recorder, set

your TV to the video channel.

HRS7700EU3.fm Page 58 Wednesday, March 8, 2000 1:58 PM

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7700EU Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info