Bedienungsanleitung JVC HR-S7800U (Seite 17 von 68) (Englisch)

658623

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Access Cable Box Brand Set screen

Press OK.

Enter cable box brand

On the Remote ONLY:

Press the appropriate

Number keys to enter

the brand code from the

list shown to the right,

then press OK.

● If the cable box’s

channel changes to 9,

setting is complete

Press OK and “CABLE

BOX CONTROL IS

ON” appears on the

screen for about 5

seconds, then it

returns to the normal

screen.

● If the cable box’s channel does not change to 9

1 Press SHUTTLE PLUS %ﬁ (or CH 5∞ on

the front panel) to move the highlight bar

(arrow) to “NO”.

2 Press OK.

3 Repeat step 7 until the cable box’s channel

changes to 9 by entering another code.

4 If the channel does not change after going

through all the code numbers listed for your

model of cable box, then try all the other

numbers.

CABLE BOX BRAND LIST

BRAND CODE

ARCHER 1, 5, 17

CABLETENNA 1, 17

CABLEVIEW 15, 16, 17, 21, 25

CITIZEN 15, 16, 17, 21, 25

CURTIS 2, 8

DIAMOND 1, 17

EASTERN 19

GC BRAND 15, 16, 17, 21, 25

GEMINI 15

GENERAL INSTRUMENTS 1, 4, 6, 11, 12, 15, 28

HAMLIN 10, 18, 19, 23

JASCO 15

JERROLD 1, 4, 6, 11, 12, 15, 28

NOVAVISION 2, 8

OAK 7, 20

PANASONIC 13, 14

PULSER 15, 16, 17, 21, 25

RCA 13, 14

REGAL 10, 18, 19, 23

REGENCY 19

REMBRANDT 1, 16, 17

SAMSUNG 5, 16, 24

SCIENTIFIC ATLANTA 2, 8

SIGMA 7, 20

SL MARX 5, 16, 17, 24, 25

SPRUCER 13, 14

STARGATE 5, 15, 16, 17, 21, 24, 25

TELEVIEW 5, 16, 24

TOCOM 1, 4, 16

UNIKA 1, 17

UNIVERSAL 16, 17, 25

VIDEOWAY 3, 9, 22

ZENITH 3, 9, 22

If the VCR’s clock has not been set (with AUTO

CLOCK set to ON)

“CABLE BOX USERS SET CLOCK MANUALLY” appears for

about 5 seconds when you press OK in step 6, then the

Clock Set screen appears.

Perform Manual Clock Set on page 12. If you press MENU

after the clock has been set, the Cable Box Brand Set

screen appears.

CABLE BOX BRAND SET

PRESS NUMBER KEY (0–9)

THEN (OK) TO TEST

PRESS (MENU) TO END

NOTES:

●

The Controller may not work with all types of cable box.

●

If your cable box does not respond to any code, you cannot

use the Controller to change cable box channels. In this case,

make sure to leave the cable box turned on and tuned to the

proper channel before the scheduled start time of timer

recording.

Contact your cable company about the possibility of

exchanging your current cable box with the one compatible

with your VCR.

●

The VCR can only change the cable box channel through the

Controller during timer recording.

●

If your cable box cannot be operated with a remote control

(because it has no remote sensor), you cannot use the

Controller to change its channels. Make sure to leave the

cable box turned on and tuned to the proper channel before

the scheduled start time of timer recording.

●

If the VCR’s memory backup expires because of a power

failure, set the cable box output channel and brand again.

●

For customers in U.S.A.: If you are unable to set the

Controller, contact JVC toll free at 1-800-252-5722.

CABLE BOX BRAND SET

DID YOUR CABLE BOX

CHANGE TO CHANNEL 09?

= YES

PRESS (5,∞), THEN (OK)

PRESS (MENU) TO END

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7800U Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info