Bedienungsanleitung JVC HR-S7800U (Seite 23 von 68) (Englisch)

658623

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do

after rewinding is complete.

● Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2

seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2

seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2

seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function

if the cassette’s record safety tab is removed.

Locating beginning of

recordings — Index Search

Index codes are placed on the tape at the beginning of

each recording when recording on this VCR. You can

find and automatically play back from the beginning of

any recording using the Index Search function.

1 Start search

While the tape is not running, press SHUTTLE PLUS

4 or ¢ on the Remote.

2 Access distant code

To access a recording of 2 to 9 index codes away,

press SHUTTLE PLUS 4 or ¢ repeatedly until

the correct number is displayed on screen (only if

“SUPERIMPOSE” is set to “ON” ; 墌 pg. 38, 39).

Playback begins automatically when the desired

recording is located.

● If you want to find the very beginning of the

desired program, press REW (

) or FF ( )

after playback starts.

NOTE:

An index code is not placed on the tape when recording is

resumed from recording pause.

CONTINUED ON NEXT PAGE \

Adjusting tracking condition

— Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition.

Whenever you insert a tape and start playback,

automatic tracking starts working and continuously

analyzes the signal to enable optimum picture quality

during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during

playback, use the manual tracking following the

procedures below.

● You can also use the manual tracking during slow

motion playback (墌 pg. 29).

1 Activate manual tracking

Press CH 5 and ∞ on the front panel at the same

time during playback.

2 Eliminate the noises on the TV screen.

Press CH 5 and ∞ (or CH + and – on the Remote).

● Press it briefly for a fine adjustment, or press and

hold for coarse adjustment. Watch the screen and

continue adjustment until optimum picture and

sound quality are achieved.

3 Reactivate automatic tracking

Press CH 5 and ∞ on the front panel at the same

time. The automatic tracking becomes active again.

Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP

sound is recorded, press A. MONITOR on the Remote.

Each time you press the button, sound changes as follows:

HI-FI: Normally select this.

Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back.

NORM:Sound on the normal track is played back.

NORM HI-FI:

Both sounds on the Hi-Fi track and normal

track are mixed and played back.

NOTES:

●

The above indication appears when “SUPERIMPOSE” is set to

“ON” (

墌

pg. 38, 39), though the monitor sound changes in

sequence.

●

If the tape being played back has no Hi-Fi sound track, the

normal sound track will be heard regardless of this setting.

●

If RF connection (

墌

pg. 7) is used for viewing pictures on the

TV, sound will be monaural even though you select “HI-FI”.

●

You can also use the menu to select your desired monitor

sound. (

墌

pg. 41)

NORM

HI-FI

HI-FI L HI-FI R

Current position

on the tape

Beginning of the current

program recorded

Beginning of the 2nd next

program recorded

–1

–2

program

recorded

program

recorded

2nd next

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7800U Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info