Bedienungsanleitung JVC HR-S7800U (Seite 41 von 68) (Englisch)

658623

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

* The default setting is bold in the table below.

This VCR can record two sound tracks simultaneously (normal and Hi-

Fi) on a Hi-Fi stereo tape.

You can select the sound track(s) to listen to while playing back a Hi-Fi

stereo tape.

In addition, when playing back a prerecorded tape containing two

separate audio programs on the Hi-Fi tracks, you can choose either one

by selecting either “HI-FI L” or “HI-FI R”.

NOTES:

●

While playing back a monaural tape, sounds on the normal track will be heard

regardless of this setting.

●

If RF connection (

墌

pg. 7) is used for viewing pictures on the TV, sound will be

monaural even though you select “HI-FI”.

●

You can also use the

A. MONITOR

button on the Remote to select the desired

monitor sound. (

墌

pg. 23)

You can determine which recording mode — either S-VHS mode or VHS

mode — is used for recording on S-VHS tapes.

When this function is set to “ON”, you can record on S-VHS tapes with

S-VHS picture quality.

When this function is set to “OFF”, you can record on S-VHS tapes with

VHS picture quality.

NOTES:

• S-VHS mode allows you to make high quality video recordings with horizontal

resolution of 400 lines, comparing with the 230 lines of resolution of

conventional VHS recordings. To achieve the highest quality picture we

recommend to record in S-VHS mode. (But remember that a conventional VHS

VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)

• S-VHS MODE setting does not affect recording on VHS tapes. Recording on

VHS tapes is always performed in VHS mode except when using S-VHS ET

mode (

墌

pg. 27).

The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used

as either the REMOTE PAUSE terminal or the AV COMPULINK terminal.

When this function is set to “ON”, you can use this terminal as the AV

COMPULINK terminal.

By connecting other JVC’s AV COMPULINK components (see the

diagram on the next page), including amplifiers (or receivers) and

televisions, one touch control of the audio and video components linked

via their AV COMPULINK connectors becomes possible.

For example: simply load a cassette in the VCR and press PLAY ( 3 ) so that

the AV COMPULINK components automatically turn on, the TV’s AV mode is

selected and the VCR starts playback. (You do not have to press PLAY ( 3 ) if

the cassette’s record safety tab is removed.)

When this function is set to “OFF”, you can use this terminal as the

REMOTE PAUSE terminal. (墌 pg. 45)

NOTE:

Connection varies depending on the type of JVC TV you have. Refer to the TV’s

instruction manual when making this connection.

CONTINUED ON NEXT PAGE \

䡵 AUDIO MONITOR

HI-FI: Normally select this.

Hi-Fi sound is played

back.

HI-FI L: Sound on the left Hi-Fi

channel is played back.

HI-FI R: Sound on the right Hi-Fi

channel is played back.

NORM: Sound on the normal track

is played back.

MIX: Both sounds on the Hi-Fi

track and normal track are

mixed and played back.

䡵 S-VHS MODE

OFF

䡵 AV COMPU-LINK

OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S7800U Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info