Bedienungsanleitung JVC HR-S9400U (Seite 8 von 76) (Englisch)

658628

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

8 EN

INITIAL SETTINGS

Clock

ATTENTION CABLE BOX SUBSCRIBERS

If you perform the Advanced Auto Clock Set procedure . . .

● Select the PBS channel on your cable box before plugging

your VCR’s power plug into the AC outlet. (If you have

more than one PBS channel, you may have to select an

alternative PBS channel if Advanced Auto Clock Set is not

successful.)

● If there is no PBS channel in your area, perform the

Manual Clock Set procedure (Z pg. 11).

● For automatic clock adjustment to take place the VCR's

power must be off and the cable box must be set to the

PBS channel at clock adjustment times.

● If you perform Advanced Auto Clock Set successfully,

D.S.T. will be set to “AUTO”. At the D.S.T. adjustment time

(Z pg. 11), your VCR's power must be off and your cable

box must be set to the host PBS channel in your area for the

D.S.T. adjustment to take place. If the clock is not set

correctly, change the D.S.T. setting to “ON” or “OFF”. See

step 9 of Semi-Auto procedure (Z pg. 10) or step 6 of

Manual procedure (Z pg. 11).

Advanced Auto Clock Set

Your VCR can automatically set its clock when the power plug is

first connected to an AC outlet.

To set the clock automatically:

1. Connect the cable or antenna cable to your VCR.

2. Connect the VCR's power plug to the AC outlet.

3. "AUTO" is displayed on the VCR's front panel to show that the

clock is being set automatically.

4. Do not power on the VCR until the clock or "--:--" is displayed

on the VCR's front display panel.

The time and date can be set automatically from clock setting data

that is transmitted by one of the regular TV broadcast channels. We

call this TV channel the "Host Channel" and it is a PBS channel in

your area. The Advanced Auto Clock Set function scans all the

channels received by your VCR to find the Host Channel and then

sets the clock.

NOT SET

SET

Before the clock is set, AUTO blinks on the display.

After setting, the current time appears (in hours and minutes).

The Advanced Auto Clock Set function will normally set the

clock correctly. However, if an incorrect time is displayed on

the front display panel, you may be receiving the clock setting

data of a PBS channel from an adjacent time zone, or an

incorrect PBS channel from a cable TV system. In this case,

perform the Semi-Auto (Z pg. 10) or Manual (Z pg. 11) clock

setting procedure.

If "AUTO CLOCK SET" or "SEMI-AUTO CLOCK SET" is selected

at the Override Auto Clock Set screen on page 10, the clock

will be adjusted automatically by the Host PBS every hour on

the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00

AM) by the incoming PBS channel clock setting data. (This

automatic clock adjustment can only be performed when the

VCR’s power is turned off. The clock will be adjusted on the

hour based on the time displayed on the VCR, not on the actual

real time.) The default setting is "AUTO CLOCK SET".

If “- - : - - ” appears on the display, your antenna cable may not

be connected to the VCR, there may not be a Host PBS signal

available in your area, or your cable box may not be set to the

PBS channel. Ensure that the antenna cable is connected

correctly. If you use a cable box ensure that your local PBS

channel is selected on your cable box (

Z ATTENTION CABLE

BOX SUBSCRIBERS). Then power on and power off the VCR,

the Advanced Auto Clock Set mode will be automatically

reactivated and "Auto" will be displayed on the VCR's front

panel. If Advanced Auto Clock Set is not performed but

everything is connected and set correctly, perform the Manual

Clock Set procedure (Z pg. 11).

NOTE:

If the memory backup fails, because of a power outage or because

the AC was removed from the VCR, Advanced Auto Clock Set

will be performed when power is restored to the VCR.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9400U Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info