Bedienungsanleitung JVC HR-S9400U (Seite 29 von 76) (Englisch)

658628

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN 29

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is

engaged. If noise appears in the picture, you can override this

and make the adjustment manually.

ENGAGE MANUAL

TRACKING MODE

During playback, press the CH5 and

∞

buttons on the

VCR's front panel simultaneously to cancel the

automatic tracking mode and enable manual tracking

adjust.

ADJUST MANUAL

TRACKING

Press CH5 or

∞

on the VCR's front panel or remote.

Press briefly for fine adjust, or press and hold for coarse

adjust. Watch the screen and continue adjusting until

optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC

TRACKING

Press the CH5 and

∞

buttons on the VCR's front panel

simultaneously.

NOTES:

●

To obtain a noiseless still picture it may be necessary to adjust

tracking in slow playback and then engage Pause.

●

Manual tracking is possible during hands-free slow-motion.

During hands-free slow-motion playback, simply press

CH5

∞

on the VCR's front panel or remote to adjust tracking.

Dynamic Contrast

Use this function to improve contrast which tends to degrade

specially with wide-screen pictures.

ENGAGE DYNAMIC

CONTRAST MODE

During playback, press DYNAMIC CONTRAST on the

VCR.

● The button will light up.

DISENGAGE DYNAMIC

CONTRAST MODE

Press DYNAMIC CONTRAST again.

● The button's light will go out.

NOTES:

●

Turn on/off as preferred.

●

The setting will remain effective even after you turn the VCR

off and on again.

Index Search

Index codes are placed on the tape at the start of each

recording. You can find and automatically play back from the

start of any recording using the Index Search function.

START SEARCH

While the tape is stopped, press TIME SCAN ™ or

£.

ACCESS DISTANT CODE

To access a recording 2–9 index codes away, press

TIME SCAN ™ or £ repeatedly until the correct

number is displayed on screen (only if SUPERIMPOSE

is set to ON (Z pg. 31). Playback begins automatically

when the desired recording is located.

● If necessary press REW or FF when play starts to

search visually to find the very beginning of the

desired program.

NOTE:

An index code is not placed on the tape when recording is

paused and then resumed.

Instant ReView

At the press of a button, you can power up your VCR, rewind the

tape and begin viewing the most recent timer-recorded program.

ACTIVATE INSTANT REVIEW

After ensuring that the Timer mode is disengaged, press

REVIEW.

● The power comes on and the VCR rewinds to the index

code indicating the start of the last timer-recorded

program, then begins playback automatically.

● You can access a program 2–9 index codes away

from the current position on the tape. If, for example,

you have 5 programs recorded and you want to

watch the third one, press REVIEW three times.

● If necessary press REW or FF when play starts to

search visually to find the very beginning of the

desired program.

● If the tape is already rewound when REVIEW is

pressed, it will play the tape from the beginning. It

will not fast forward to an index code.

● The Instant Review function will also operate if the

VCR's power is on.

Manual Index Mark/Erase

To mark an index code...

...during playback press INDEX MARK on the VCR's front panel.

n The VCR will mark an index code at that location.

n If "SUPERIMPOSE" is set to ON (Z pg. 31), "MARK" blinks on

the screen while an index code is being marked.

To erase an index code...

...during playback or still press INDEX ERASE on the VCR's

front panel.

n The VCR will fast-forward to the nearest index code (Sound

will not be heard during this) and erase it. Playback continues

after the index code is erased.

n If "SUPERIMPOSE" is set to ON (Z pg. 31), "ERASE" blinks on

the screen while an index code is being erased.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9400U Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info