Bedienungsanleitung JVC HR-S9500U (Seite 39 von 76) (Englisch)

658629

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN 39

Speed

Names of

special-effects

playback

Reverse Forward

Search Play

Slow-Motion

Still*

Slow-Motion

Play Search

(Pro-Slow)** (Pro-Slow)**

-7x -5x -3x -1x -1/2x -1/3x 0 1/3x 1/2x 1x 1.5x 2x 3x 5x 7x

Audio is output.

Audio is Audio is Audio is

Audio is output.

not output. output. output.

TimeScan

Audio output

** Still mode cannot be engaged using the TIME SCAN buttons. Still mode can only be engaged by pressing

the PAUSE button.

** Smooth slow motion delivering an uninterrupted moving image without distortion.

● The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.

● The TimeScan search speed is the same for SP and EP recordings.

● To resume normal playback, press PLAY.

● Picture may be distorted at the position where the recording speed is switched.

● The picture may be noisy for a moment when you change the playback speed.

● During high-speed search with a tape containing both SP and EP recordings, the search speed will change automatically to 7x

normal playback speed with TimeScan when the recording tape speed switches from EP to SP.

● Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.

● Picture may appear distorted in comparison to normal playback.

● In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

● TimeScan sound quality will differ in comparison to normal playback.

● When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x

normal speed, the audio playback may be faster than normal.

● When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

● ±1/3x slow-motion playback is possible with SP recordings only.

● Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.

● Pro-Slow cannot be activated by pressing PAUSE for longer than 2 seconds.

● Depending on the type of tape in use, noise may appear during Pro-Slow. When this happens, try manual tracking (

Z pg. 26).

● The operations by the JOG dial/SHUTTLE ring do not include TimeScan; noise will appear on the screen and audio will not be

output.

If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF".

TimeScan Audio

The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. *The default setting is "ON".

1 Press MENU to access the Main Menu screen.

2 Move the highlight bar (arrow) to "FUNCTION SET" by press-

ing CH5∞ or TIME SCAN%ﬁ, then press OK or TIME SCAN

3 Move the highlight bar (arrow) to "TIMESCAN AUDIO" by

pressing CH5∞ or TIME SCAN %ﬁ, then press OK or TIME

SCAN to select to "ON" or "OFF".

4 Press MENU to return to the normal screen.

AUDIO MONITOR HI-FI

S-VHS MODE ON

AV COMPU-LINK ON

VIDEO CALIBRATION ON

= TIMESCAN AUDIO ON

FRONT AUX INPUT VIDEO

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

FUNCTION

= AUTO TIMER OFF

SUPERIMPOSE ON

AUTO SP

=EP TIMER OFF

DIGITAL R3 ON

VIDEO STABILIZER OFF

2ND AUDIO RECORD OFF

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9500U Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info