Bedienungsanleitung JVC HR-S9500U (Seite 51 von 76) (Englisch)

658629

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN 51

123

456

NUMBER "9"

NUMBER "8"

TIMER

NUMBER "7"

SP/EP

SET TAPE SPEED

Press SP/EP to set the tape speed.

RETURN TO NORMAL

SCREEN

Press PROG. or OK. "PROGRAM COMPLETED"

appears on the screen for about 5 seconds, then normal

screen appears.

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically and "‰"

is displayed on the display panel.

PROG.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 3 through 9, press WEEKLY (NUMBER

key “9”) for weekly serials or DAILY (NUMBER key “8”) for

daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"

appears on the screen. Pressing the button again makes the

corresponding indication disappear.

NOTES:

●

To disengage the timer before recording starts, press TIMER

again. Pressing once more re-engages it.

●

In case of a power failure after programming, the VCR’s memory

backup keeps your selections for approximately 10 minutes.

●

Programs that start after midnight must have the next day’s date.

●

After timer recording is completed, the VCR’s power goes off

automatically.

●

You can program the timer while a regular recording is in

progress; the on-screen menu will not be recorded.

●

If the end of tape is reached during timer recording, the

cassette is automatically ejected.

●

When timer-recording cable or satellite channels through an

external tuner, be sure to keep the cable box or satellite

receiver's power ON.

10:00

11:00

12:00

ATTENTION

If there is a conflict in the timer schedule and one program

overlaps with another, only the parts shown below in gray

will be recorded.

Pattern 1: The program with the lower program number

will be recorded.

Pattern 2: The program that is broadcast earlier will be

recorded.

Pattern 3: The program that is broadcast earlier will be

recorded, followed by the remaining portion of

the other program.

CH10

CH40 Not recorded

Program 1

Program 2

10:00

11:00

12:00

CH10

Program 2

Not recorded

Program 1

CH40

10:00

11:00

12:00

CH10

CH40

Program 1

Program 2

Not recorded

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver

(unless "DBS RECEIVER SET" is

set to "OFF" Z pg. 20), the

BAND indication (TV or CATV

or DBS) appears under the

channel number display. If the

channel number that has been

entered requires that the band

be set, "7=DBS" is displayed

on the screen. Press the NUMBER key "7" to select the

desired band.

a– TV : To timer-record a regular TV program received

on the VCR.

b– CATV : To timer-record a cable TV program received on

the VCR, or through a cable box (unless "CABLE

BOX SET" is set to "OFF"

Z pg.17).

c– DBS : To timer-record a satellite program received

through a DBS receiver.

● If "BAND" is set to "TV" at the Tuner Set screen (Z pg.14)

and "CABLE BOX SET" is set to "OFF" at the Cable Box

Set screen (Zpg. 17), CATV will not be displayed on the

Program screen; If "BAND" is set to "CATV" or "CABLE

BOX SET" is set to "ON", TV will not be displayed.

PROGRAM 1

START STOP

8:00AM = 9:00PM

DATE CH

12/24/98 110 SP

THU DBS

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY, 7=DBS), THEN (0K)

PRESS (PROG.) TO END

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9500U Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info