Bedienungsanleitung JVC HR-S9600U (Seite 17 von 76) (Englisch)

658630

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN 17

123

456

ACCESS CABLE BOX

BRAND SET SCREEN

Press OK.

ENTER CABLE BOX BRAND

Press the appropriate

NUMBER keys to enter the

Cable Box Code from the

CABLE BOX BRAND LIST

shown below, then press

OK.

● If the cable box’s

channel changes to 9,

setting is complete. Press OK and "CABLE BOX

CONTROL IS ON" appears on the screen for about 5

seconds, then it returns to the normal screen.

● If the cable box's channel does not change to 9, press

CH 5∞ or TIME SCAN %ﬁ to move the highlight bar

(arrow) to "NO", then press OK. By entering another

code, repeat step 8 until the cable box’s channel

changes to 9.

● If the channel does not change after going through all

the code numbers listed for your model of cable box,

then try all the other numbers between 1 and 25.

CABLE BOX BRAND LIST

BRAND CODE

ARCHER 1, 5, 17

CABLETENNA 1, 17

CABLEVIEW 15, 16, 17, 21, 25

CITIZEN 15, 16, 17, 21, 25

CURTIS 2, 8

DIAMOND 1, 17

EASTERN 19

GC BRAND 15, 16, 17, 21, 25

GEMINI 15

GENERAL INSTRUMENTS 1, 4, 6, 11, 12, 15

HAMLIN 10, 18, 19, 23

JASCO 15

JERROLD 1, 4, 6, 11, 12, 15

NOVAVISION 2, 8

OAK 7, 20

PANASONIC 13, 14

PULSER 15, 16, 17, 21, 25

RCA 13, 14

REGAL 10, 18, 19, 23

REGENCY 19

REMBRANDT 1, 16, 17

SAMSUNG 5, 16, 24

SCIENTIFIC ATLANTA 2, 8

SIGMA 7, 20

SL MARX 5, 16, 17, 24, 25

SPRUCER 13, 14

STARGATE 5, 15, 16, 17, 21, 24, 25

TELEVIEW 5, 16, 24

TOCOM 1, 4, 16

UNIKA 1, 17

UNIVERSAL 16, 17, 25

VIDEOWAY 3, 9, 22

ZENITH 3, 9, 22

NOTES:

●

Although the supplied Controller is compatible with many

different cable box brands, it is possible that it will not work

with your cable box.

●

If your cable box doesn’t respond to any code between 1 and

25, you can’t use the Controller to change cable box

channels. In this case, make sure to leave the cable box

turned on and tuned to the proper channel before the

scheduled start of timer recording.

Please contact your cable company about the possibility of

exchanging your current cable box with one that is compatible

with your VCR.

●

The VCR can only change the cable box channel through the

Controller during timer recording.

●

If your cable box is one that can’t be operated with a remote

control (because it has no remote sensor), you can’t use the

Controller to change its channels. Make sure to leave the

cable box turned on and tuned to the proper channel before

the scheduled start of timer recording.

●

If the VCR's memory backup expires because of a power

failure, set the cable box output channel and brand again.

●

If you are unable to set the Controller, please contact JVC toll

free at 1-800-252-5722.

When the VCR's clock has not been set (with AUTO

CLOCK set to ON), if you press OK in step 7, "CABLE BOX

USERS SET CLOCK MANUALLY" will be displayed on the

screen for about 5 seconds, then the Clock Set screen will

appear; perform the manual clock setting procedure on

page 12. If you press MENU after the clock has been set,

the Cable Box Brand Set screen appears.

INFORMATION

CABLE BOX BRAND SET

PRESS NUMBER KEY (0–9)

THEN (OK) TO TEST

PRESS (MENU) TO END

NUMBER

JOG

SHATTLE

−

TIME SCAN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9600U Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info