Bedienungsanleitung JVC HR-S9900U (Seite 25 von 88) (Englisch)

658631

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

EN 25

Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP

sound is recorded, press A. MONITOR on the Remote.

Each time you press the button, sound changes as follows:

HI-FI: Normally select this.

Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back.

NORM:Sound on the normal track is played back.

NORM HI-FI:

Both sounds on the Hi-Fi track and normal

track are mixed and played back.

NOTES:

●

The above indication appears when “SUPERIMPOSE” is set to

“ON” (

墌

pg. 56, 57), though the monitor sound changes in

sequence.

●

If the tape being played back has no Hi-Fi sound track, the

normal sound track will be heard regardless of this setting.

●

If RF connection (

墌

pg. 7) is used for viewing pictures on the

TV, sound will be monaural even though you select “HI-FI”.

●

You can also use the menu to select your desired monitor

sound. (

墌

pg. 59)

Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do

after rewinding is complete.

● Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2

seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2

seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2

seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function

if the cassette’s record safety tab is removed.

Playing back tape repeatedly

— Repeat Play

You can play back a tape repeatedly (100 times).

While playing back a tape, press and hold PLAY ( 3 )

for more than 5 seconds.

The play indicator ( # ) on the front display panel starts

flashing slowly, and a tape will be played back 100

times.

To stop playback, press STOP ( 7 ) on the Remote or

STOP/EJECT ( 7 / 0 ) on the front panel.

Adjusting tracking condition

— Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition.

Whenever you insert a tape and start playback,

automatic tracking starts working and continuously

analyzes the signal to enable optimum picture quality

during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during

playback, use the manual tracking following the

procedures below.

● You can also use the manual tracking during slow

motion playback (墌 pg. 36).

1 Activate manual tracking

Press CH 5 and ∞ on the front panel at the same

time during playback.

2 Eliminate the noises on the TV screen.

Press CH 5 or ∞ (or CH + or – on the Remote).

● Press it briefly for a fine adjustment, or press and

hold for a coarse adjustment. Watch the screen

and continue adjustment until optimum picture

and sound quality are achieved.

● To reactivate automatic tracking, press CH 5 and

∞ on the front panel at the same time. The

automatic tracking becomes active again.

NORM

HI-FI

HI-FI L HI-FI R

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9900U Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info