Bedienungsanleitung JVC HR-S9900U (Seite 58 von 88) (Englisch)

658631

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

58 EN

* The default setting is bold in the table below.

When this function is set to “ON”, the VCR automatically switches to EP

mode to allow complete recording if there is not enough tape to record

the entire program while timer-recording in SP mode.

For Example . . .

Recording a program of 140 minutes in length onto a 120-minute tape

Make sure you set this function to “ON” before the timer-recording starts.

NOTES:

●

If you have programed the VCR to timer-record 2 or more programs, the second

program and those thereafter may not fit on the tape with this function set to

“ON”. In this case, do not use this function, but change the tape speed

manually during timer programing.

●

In order to ensure that the recording fits on the tape, this function may leave a

slight non-recorded portion at the end of the tape.

●

There may be some noise and sound disturbance where the tape speed switches

from SP to EP mode on the tape.

●

This function is not available during ITR (Instant Timer Recording), and will not

work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-

120.

When this function is set to “ON”, edge correction to the luminance

signal is performed to enhance details. Normally set this function to

“ON”.

NOTES:

●

Depending on the type of tape being used, picture quality may be better with

“DIGITAL R3” set to “OFF”.

●

If you use this VCR as the playback VCR for editing, be sure to set “DIGITAL

R3” to “OFF” before starting.

When this function is set to “ON”, you can automatically correct vertical

vibrations in the picture when playing back unstable recordings made on

another VCR.

NOTES:

●

When you finish viewing a tape, be sure to set this function to “OFF”.

●

Regardless of the setting, this function has no effect during recording and during

special effects playback.

●

The on-screen display may jitter vertically when this function is set to “ON”.

●

To watch recordings with close-caption, set this function to “OFF”.

●

Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you

activate Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video

Stabilizer will be automatically turned “OFF”.

When this function is set to “ON”;

● If a SAP program is received, the SAP audio is recorded on both the

normal and Hi-Fi tracks. The main audio is not recorded.

● If a non-SAP program is received, the main audio is recorded on both

the Hi-Fi and normal tracks.

When this function is set to “OFF”, the SAP audio cannot be recorded.

䡵 AUTO SP = EP TIMER

OFF

䡵 VIDEO STABILIZER

OFF

Approximately 110 minutes

SP mode

Approximately 30 minutes

EP mode

OTHER USEFUL FUNCTIONS (cont.)

䡵 2ND AUDIO RECORD

OFF

䡵 DIGITAL R3

OFF

Refer to page 56 for setting procedures.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9900U Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info