Bedienungsanleitung JVC HR-S9911U (Seite 25 von 32) (Englisch)

658632

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

—25—

Audio Dubbing

Audio Dubbing replaces a previously recorded normal audio track

with a new soundtrack.

Make connections

Connect an audio cable between the VCR’s audio input

connectors and the audio component’s audio output connectors.

●

When connecting a monaural audio component, use only the

VCR’s AUDIO L input connector.

●

Audio Dubbing is possible only by using the audio input

connectors on the front panel or on the rear panel.

Select input location

Select “F-1” —when connecting the audio component to the

audio input connectors on the front panel.

Select “L-1” —when connecting the audio component to the

audio input connectors on the rear panel.

On the VCR

Press CH+/– or push the ADVANCED JOG dial, then turn it to the

left or right until “L-1” or “F-1” appears on the display panel.

On the Remote

Press AUX and/or CH+/– until “L-1” or “F-1” appears on the

display panel.

Locate start point, and engage Audio Dubbing mode

Load a cassette and press PLAY (

) on the VCR. Press PAUSE (

)

at the point where you want to start dubbing, then press A.DUB.

●

The VCR enters the Audio Dubbing Pause mode. “

” blinks,

“

” and “

“ light up on the display panel.

Start dubbing

Engage the Play mode on the audio component, then press PLAY

(

) on the VCR. Audio Dubbing begins. “

” blinks, and “

”

lights up on the display panel.

●

To pause dubbing, press PAUSE (

). Press PLAY (

) to resume

dubbing.

End Audio Dubbing

Press STOP (

) on the Remote or STOP/EJECT (

) on the VCR,

then engage the Stop mode of the audio component.

NOTES:

●

When monitoring the sound during Audio Dubbing, the normal

soundtrack is automatically selected. If you wish to hear the

Hi-Fi or mixed sound (Hi-Fi + normal soundtracks), press

A.MONITOR to select “NORM HI-FI”. (

墌

pg. 11, “Selecting

monitor sound”)

●

Audio Dubbing stops automatically when the counter reaches

“0:00:00”, and the VCR enters the Play mode. Check the

counter reading before dubbing.

●

Audio Dubbing is not possible with a cassette whose record

safety tab has been removed.

●

When playing back an audio-dubbed tape, press A.MONITOR

to select the soundtrack you wish to hear. (

墌

pg. 11, “Selecting

monitor sound”)

Insert Editing and AV Dubbing

Insert Editing:

You can replace a recorded scene with new scene recorded on

another tape or with other material. Both the picture and the

sound recorded on the Hi-Fi sound track are replaced at the same

time.

AV Dubbing:

You can perform Audio Dubbing and Insert Editing at the same

time. This means that the picture and the sounds recorded on the

Hi-Fi sound track and on the normal track are replaced at the

same time.

●

For AV Dubbing, you can edit pictures and sound using different

sources; connect a video source to the video input connector,

and an audio source to the audio input connectors.

Make connections

Connect the supplied audio/video cable between the VCR’s audio/

video input connectors and the other component’s audio/video

output connectors.

●

Insert Editing and AV Dubbing are possible only by using the

audio/video input connectors on the front panel or on the rear

panel.

Select input location

Select “F-1” —when connecting the other component to the

audio/video input connectors on the front panel.

Select “L-1” —when connecting the other component to the

audio/video input connectors on the rear panel.

On the VCR

Press CH+/– or push the ADVANCED JOG dial, then turn it to the

left or right until “L-1” or “F-1” appears on the display panel.

On the Remote

Press AUX and/or CH+/– until “L-1” or “F-1” appears on the

display panel.

Select video input connector

Select the appropriate mode depending on the connector being

used (

墌

pg. 21).

When using S-VIDEO input connector on the front panel, set

“FRONT AUX INPUT” to “S-VIDEO”.

When using S-VIDEO IN connector on the rear panel, set “REAR

AUX INPUT” to “S-VIDEO”.

When using VIDEO input connector on the front panel, set

“FRONT AUX INPUT” to “VIDEO”.

When using VIDEO IN connector on the rear panel, set “REAR

AUX INPUT” to “VIDEO”.

Select edit mode

Set the edit mode to “ON” for the VCRs if such a mode is

equipped.

●

On this VCR, set “PICTURE CONTROL” to “EDIT” (

墌

pg. 20).

To AUDIO input

This VCR

CD player, etc.

To audio output

To S-video output

This VCR (for recording)

Another VCR (for playback)

S-video cable

(supplied)

To S-VIDEO input

To audio/video output

Audio/video cable

(supplied)

To AUDIO/VIDEO

input

CONTINUED ON NEXT PAGE

HR-S9911U-EN.fm Page 25 Monday, April 22, 2002 1:34 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9911U Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info