Bedienungsanleitung JVC HR-V206E (Seite 11 von 16) (Englisch)

584573

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

January 31, 2003 6:13 pm Page 11

— 11 —

Master Page: Right

Accidental erasure prevention

To prevent accidental recording on a

recorded cassette, remove its record

safety tab. To record on it later, cover

the hole with adhesive tape.

Basic Recording

Load a cassette

Make sure the record safety tab is intact. If not, cover the hole

with adhesive tape before inserting the cassette.

● The recorder turns on, and the counter is reset, automatically.

Select recording channel

Press PR+/ or the number keys.

● You can select channel in the stop mode or recording pause

mode.

Set tape speed (HR-V505/V506/V507E only)

Press SP/LP (p). The current setting for the tape speed appears

on the screen for about 3 seconds. Press SP/LP (p) again to

change the setting while tape speed is displayed.

Start recording

Press 7.

● If the tape reaches its end during recording, the recorder stops

recording, rewinds the tape and ejects the cassette, then enters

the standby mode automatically.

Recording Features

Tape Position/Time Counter

Press OK repeatedly to display the tape position and time

counter on the screen. To reset the time counter, press 0000.

NOTES:

● Set OSD to ON to display the indications on the screen.

(

੬

● Depending on the type of tape used, the tape position may not

appear right away.

Memory Stop Facility

The recorder stops automatically when rewinding the tape and the

counter reaches “M 0:00:00”. If you set the counter to

“M 0:00:00” before the playback or recording, you can easily

access the pre-selected position by using the time counter.

A Press OK repeatedly to display the counter on the screen.

B Press 0000 to reset the counter before playback or recording.

C Start playback or recording.

D Press 3 after playback or recording. The tape rewinds and

stops automatically when the counter reaches to “M 0:00:00”.

Watching one programme while recording another

If your recorder is connected to the TV via the AV connection,

press TV/VCR.

Once recording is in progress, all you need to do is to set the

channel controls on the TV for the station you wish to view.

The programme selected with the TV’s channel controls appears

on the screen while the one selected with the PR+/ is recorded

on the tape.

● If a decoder is connected to the recorder, you can select a

scrambled channel as well with the TV channel controls.

Specifying recording length

— Instant Timer Recording (ITR)

During recording, press 7 (ITR) repeatedly until the desired

recording length appears on the screen.

● Each time you press the button, recording length increases in

30-minute intervals (up to 9 hours).

● The recorder enters the standby mode after recording is

finished.

● To cancel an ITR, press 8 on the remote control or 0 on the

recorder.

Receiving stereo and bilingual programmes

(HR-V505/V506/V507E only)

Your recorder is equipped with a Sound-Multiplex decoder (A2)

and a Digital stereo sound decoder (NICAM) as well, making

reception of stereo and bilingual broadcasts possible.

● To listen to a stereo programme, set “AUDIO” to “STEREO”.

(

੬

● To listen to a bilingual programme, set “AUDIO” to “LEFT” or

“RIGHT”. (

੬

● To listen to the standard (regular monaural) audio while

receiving a NICAM broadcast, set “AUDIO” to “MONO”.

(

੬

NOTE:

Set OSD to ON to display the indications on the screen.

(

੬

To record stereo and bilingual programmes (A2)

● Stereo programmes are automatically recorded in stereo on the

Hi-Fi audio track (with the normal audio track recording mixed

L and R channel sound).

● Bilingual programmes are automatically recorded in bilingual

on the Hi-Fi audio track. The main soundtrack is recorded on

the normal audio track.

To record NICAM stereo and bilingual programmes

The NICAM audio programme is recorded on the Hi-Fi audio

track, and the standard audio programme on the normal audio

track.

NOTES:

● Set NIC to AUTO. (

੬

● If the quality of stereo sound being received is poor, the

broadcast may be received in monaural with better quality.

● Before playing back a programme recorded in stereo, or a

bilingual programme, set AUDIO to the appropriate mode.

(

੬

Recording

Turn on the TV and select the AV mode or video channel.

During recording

Pause recording

Press 9.

● Press 9 to resume recording.

● You can select channel in the recording pause mode.

● There will be a loss of color, or the picture will be distorted

where the channel is changed.

Stop recording

Press 8 on the remote

control.

OR Press 0 on the recorder.

Record safety tab

HR-V505_205E-001EN.fm Page 11 Friday, January 31, 2003 6:13 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-V206E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC HR-V206E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info