Bedienungsanleitung JVC HR-V505E (Seite 5 von 16) (Englisch)

610394

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

January 31, 2003 6:13 pm Page 5

— 5 —

Master Page: Right

Check contents

Make sure the package contains all of the accessories listed in

“Specifications” (

੬

16).

Situate recorder

Place the recorder on a stable, horizontal surface.

Connect recorder to TV

RF Connection

Disconnect the TV aerial cable from the TV.

Connect the TV aerial cable to the AERIAL connector on the

rear of the recorder.

Connect the provided RF cable between the RF. OUT

connector on the rear of the recorder and the TV’s aerial

connector.

AV Connection

If your TV is equipped with a 21-pin SCART connector, perform

AV connection to improve picture quality during tape playback.

Connect the aerial, recorder and TV as shown in the

illustration.

Connect an optional 21-pin SCART cable between the EURO

AV1 AUDIO/VIDEO connector on the rear of the recorder and the

TV’s 21-pin SCART connector.

Icon Description

F ABC OSD

Select this icon to set the language. You can

select among 7 languages. (

੬

G AUDIO STEREO / LEFT / RIGHT / MONO

(HR-V505/V506/V507E only)

Your recorder is capable of recording four

soundtracks (STEREO, LEFT, RIGHT and

MONO) and plays back the one you select.

STEREO: For Hi-Fi stereo tapes

LEFT: For main audio of Bilingual tapes

RIGHT: For sub audio of Bilingual tapes

MONO: For audio-dubbed tapes

H OSD ON / OFF

When this function is set to “ON”, various

recorder status information (on-screen display)

appears on the screen.

NOTE:

When you use the recorder as the source player

for editing a tape, be sure to set this function to

OFF. Otherwise, the recorder status

information will be recorded on the edited tape.

I 16:9/4:3 AUTO / 16:9 / 4:3

You can select the aspect ratio of your TV.

AUTO: Normally select this. You can play back

the 16:9 and 4:3 screen-programme as they are.

16:9: You can play back the programme with

the 16:9 screen format.

4:3: You can play back the programme with the

4:3 screen format.

NOTE:

Set your TV to its AV mode if the picture is cut

off on the screen when you play back the

programme with the 16:9 screen format.

J DECODER ON / OFF

Set “DECODER” to “ON” when you use a

decoder connected to the EURO AV2

DECODER connector.

K EPC OFF / SOFT / SHARP

This function helps you to adjust the playback

picture quality according to your preference.

OFF: Picture quality is not adjusted.

SOFT: Reduces image coarseness when viewing

overplayed tapes containing much noise.

SHARP: Clearer, sharper-edged picture when

viewing images with much flat, same-coloured

surfaces such as cartoons.

NOTE:

You can perform EPC setting only during

playback.

L NIC AUTO / OFF

(HR-V505/V506/V507E only)

Select the appropriate mode. Refer to page 11.

AUTO: The recorder detect NICAM broadcasts

automatically.

OFF: The recorder does not detect NICAM

broadcasts.

Basic Connections

Aerial connector

Back of TV

21-pin SCART

connector

TV aerial cable

RF cable

(provided)

21-pin SCART cable

(not provided)

Mains power cord

Mains outlet

Back of recorder

EURO AV1

AUDIO/VIDEO

RF. OUT

AERIAL

HR-V505_205E-001EN.fm Page 5 Friday, January 31, 2003 6:13 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-V505E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC HR-V505E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info