Bedienungsanleitung JVC hr-v506 (Seite 10 von 16) (Englisch)

134633

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

January 31, 2003 6:13 pm Page 10

— 10 —

Master Page: Right

Basic Playback

Load a cassette

Make sure the window side is

up, the rear label side is facing

you and the arrow on the front of

the cassette is pointing towards

the recorder.

● Do not apply too much pressure when inserting.

● The recorder turns on, and the counter is reset, automatically.

● If the cassette’s record safety tab has been removed, playback

begins automatically.

Start playback

Press 4.

● If the tape reaches its end during playback, the recorder stops

playback, rewinds the tape and ejects the cassette, then enters

the standby mode automatically.

Variable Speed Search (HR-V505/V506/V507E only)

Playback Features

Adjusting tracking condition

Automatic tracking adjustment

When a new cassette is loaded, the recorder enters the automatic

tracking mode.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during

playback, adjust the tracking manually.

Press and hold PR + or  to eliminate the noises.

Selecting Soundtrack (HR-V505/V506/V507E

only)

Your recorder is capable of recording four soundtracks (STEREO,

LEFT, RIGHT and MONO) and plays back the one you select. Set

“AUDIO” to the appropriate mode. (

੬

NOTE:

Set OSD to ON to display the indications on the screen.

(

੬

Rewind Power Off

When the tape is not running, press 3, then press 1. “REW”

blinks on the screen. The recorder enters the standby mode

automatically after rewinding the tape.

Ez (Easy) Power Off

During playback, press . The recorder stops playback,

rewinds the tape and ejects the cassette, then enters the standby

mode automatically.

Skipping unwanted portions

— Skip Search

Press 30 SEC once to 6 times during playback. Each press

initiates a 30-second period of high-speed playback (up to

3 minutes). When the specified portion of the tape is skipped,

normal playback resumes automatically. To return to normal

playback during Skip Search, press 4.

Playback

Turn on the TV and select the AV mode or video channel.

During playback

Stop playback

Press 8 on the remote

control.

OR Press 0 on the recorder.

Pause playback and view still picture

Press 9.

● The recorder enters Pause mode after moving 2 or 3 frames.

● If there is vertical jitter, use the PR+/ to correct the picture.

● Press 4 to resume normal playback.

● Still picture playback stops automatically after about 5 minutes

to protect the heads.

Pause and Frame-by-Frame playback

Press 9 to pause, then press 9 repeatedly.

● Press 4 to resume normal playback.

Slow-motion

HR-V505/V506/V507E

During still picture, press e to start forward slow motion

playback. If you press 9, still picture resumes.

HR-V205/V206E

During playback or still, press and hold 9 for 2 seconds, then

release it. Press 4 or 9 again to resume playback or still picture.

● Slow motion playback stops automatically after about 30

seconds to protect the heads, then normal playback resumes.

High-Speed Search

Press 3 or 5.

● Press 4 to resume normal playback.

● High-speed search stops automatically after about 3 minutes to

protect the heads, then normal playback resumes.

Variable Speed Search (HR-V505/V506/V507E only)

Press w or e repeatedly.

● Press 4 to resume normal playback.

● Each time you press w or e, the playback speed changes. To

decrease the speed during picture search, press the opposite

direction button repeatedly.

● If there is vertical jitter, use the PR+/ to correct the picture.

TTENTION:

In the search, still, slow-motion or frame-by-frame playback mode,

● the picture will be distorted

● the noise bars will appear

● there will be a loss of color with an LP-recorded tape (HR-

V505/V506/V507E only)

Reverse

2steps

Reverse play

Forward

slow motion

1step

Normal play

Forward

2 steps

When the tape is not running

Rewind/fast-forward at high speed

Press 3 or 5.

● If you press and hold 3 or 5 during rewinding or fast-

forwarding, you can see the picture on the screen. Releasing it

cancels the picture search and resume rewinding and fast-

forwarding.

Eject the cassette

Press . OR Press 0 on the recorder.

● You can also eject the cassette when the recorder is standby

mode.

Turn off the recorder

Press 1 on the remote

control. The recorder enters

the standby mode.

OR Press 1 on the recorder.

The recorder turns off.

HR-V505_205E-001EN.fm Page 10 Friday, January 31, 2003 6:13 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC hr-v506 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC hr-v506

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info